Monthly Archives: March 2017

For HP Technical Support, Call Us Now :

Printer Error Code 20

How to Resolve HP Printer Error Code 20 (Printer Not Activated)?

Printer Error Code 20 in HP printer which signifies that “Printer Not Activated, displayed usually on computer while printing. It is suggested by HP printer technical support experts that before proceeding to solution, they are requested to verify if printer is working fine? This can be performed easily by printing a self-test page and verifying that USB connectivity from printer to computer is well maintained.

HP Latest App: How to Download & Use “HP All in One Printer Remote App”?

Cause of “Error Code 20” in HP Printer

Printer Error Code 20 may be reason where wrong printer is set-up as a default printer and printer driver is missing, or if there are few conflicts found in device manager.

Printer Error Code 20

Steps to Rectify HP Printer Error Code 20

Step 1:

It is Essential Printer is set as a Default Printer

  • Click on “Start: button and then click on “Printers and Faxes” icon to open Printers folder.
  • If it is found that desired printer icon is missing, then a user’s is requested to proceed to go to Step two.
  • Make sure that desired printer has a proper check mark which should be located next to it indicating that it is set as a default printer.
  • If desired printer does not have a prominent check mark, then just right-click on printer icon and then click on “Set as Default Printer” icon.
  • Tap on printer icon, and click on “Print Test Page to print a Windows self-test” page.
  • If your Windows test page prints successfully, it is suggested by HP printer tech support to close all windows and try printing again from application what they were using before.
  • If Windows test-page is not print yet, then go to Step two.

Related Printer Issues: How to Reset an HP Photosmart Printer?

Step 2:

Re-Installation of USB Composite Device from Device Manager

  • Click on “Start’ menu and then tap on “Run” button.
  • Type “devmgmt.msc” command directly in Run window and then press “Enter to open Device Manager Window” icon.
  • Click on “(+)’ which is located just next to “Universal Serial Bus Controllers”.
  • Right click on “USB Composite Device” and then click on “Uninstall” button. Click on OK.
  • Disconnecting of USB cable directly from computer and then reconnecting it required.
  • Follow all instructions in “Found New Hardware wizard” to easily install drivers.
  • Right-click on printer icon, and then tap on “Print Test Page” to easily print a Windows self-test page.
  • Close all windows and then try to print from application which you were using before.

Step 3:

Reinstallation of HP Software

  • If all the above steps do not work for your problems, please uninstall and then reinstall HP software carefully.

If you are still stuck to fix HP printer error code 20 issues. Come and get your issues resolved with our technicians.


We convey the best-in-class HP printer customer support service answers to our HP clients all over world equipped with the choice of advanced level HP solutions by applying the most recent tricks to solve HP issues at a go.  Solutions are delivered at completely lowest rates to meet user’s demand.  Ours is 24 hours 365 days in a year service which is made available to users immediately. Come and explore our services at +1-800-297-9982 toll-free number.

HP Touchpad Error Code: “3099”

How to Overcome from HP Touchpad Error Code: “3099”?

HP Touchpad Error Code: “3099” has high chances to occur due to wide variety of facts. If a user has encountered this error, then users are recommended to download HP Touchpad Error Code: “3099” repair tool initially. Continue reading

Connect Wi-Fi in HP Laptop via Mobile

How to Connect Wi-Fi in HP Laptop via Android Smartphone?

There are numerous ways to connect Wi-Fi in HP laptop via an Android Smartphone. If you own an Android Smartphone, then you can surf the internet by tether it via a wireless hotspot or a USB cord.

Connect Wi-Fi in HP Laptop

2 Efficient & Effective Methods to Connect Wi-Fi in HP Laptop via Android Smartphone

Method 1:  Create A Wireless Hotspot.

  • To create the wireless hotspot, you need to open the “Settings” app in the App Drawer.
  • In the “Wireless and network” section, click at “Tethering and portable hotspot”.
  • Tick the box named “Portable Wi-Fi hotspot”. Slide it to switch it on.
  • The next step is to click at the “Portable Wi-Fi hotspot settings” button to configure the security and name of your Wi-Fi network.

Related HP Laptop Problems: How to Find If Your HP Laptop has a Wi-Fi Card?

Method 2: Tethering An Android Device

  • USB tethering is a good option if you want to connect one device with your Smartphone USB port.
  • If you wish to connect a tablet with no USB port or multiple devices, you need to use a wireless hotspot.
  • For USB tethering, connect your phone to your laptop through the USB cable.
  • Launch the settings. Either push the Menu button and choose Settings, or launch the Settings app in the App Drawer.
  • Click at “Tethering and portable hotspot” in the “Wireless and network” section.
  • The next step is to click on “USB tethering” box.
  • The final step is to uncheck the box to end sharing.

Congratulation! You are ready to use your mobile data in HP laptop, if one can unable to connect Wi-Fi in HP laptop via mobile by own dial our toll-free number +1-800-297-9982 any time, round the clock for quick online assistance for HP Laptop Support and all the technical issues related to the HP laptops.

Also have a look on this Info-graphics to Secure Your Wi-Fi Network

Reset an HP Photosmart Printer

Steps to Reset an HP Photosmart Printer

Resetting the Hewlett-Packard (HP) Photosmart printer can easily resolve all types of software problems and other error messages related to ink cartridges as well as printing issues. A user can easily reset an HP Photosmart Printer either via disconnecting it completely from the power source, or via restoring method of the printer to its original factory settings.

Reset an HP Photosmart Printer

Expert Guidance to Reset an HP Photosmart Printer by HP Printer Tech Support:

Disconnecting Completely from Power Source:

  • Verify that the Photosmart printer is powered on, and then disconnect the USB cable from the back of the printer.
  • Open the printer cover and then carefully remove the ink cartridges.
  • Close the printer cover, and then wait for a message to display on the screen which is readable as “Insert Ink Cartridges.”
  • Disconnect the power cord right from the back of the printer.
  • Wait for a minute to pass, and then reconnect the power cord to the printer carefully.
  • Wait for the printer to automatically restart.
  • Open the printer cover, and re-insert the ink cartridges.
  • Close the cover, and then reconnect the USB cable to the back of the printer

See Slides about HP Newly Launched App: How to Download & Use “HP All in One Printer Remote App”?

Restore the Factory Settings:

  • Press the “Menu” option which is located in the front console of the HP Photosmart printer.
  • Press the Up and Down arrows which are located in the console to help find and select “Preferences ” according to users’ choice
  • Highlight the “Restore Defaults,” and then select “OK.”


If you still unable to use your HP Photosmart printer, reach out at our HP printer technical support services, available for different group of customers using various HP related issues worldwide. We work 24 hours a day to meet their daily demands for various workings issues faced by them. We believe in customer satisfaction and have the best track record of the highest success rate to identify customer’s problem and solve them instantly with successful results. If you are looking to contact HP printer customer support and searching for online assistance to resolve your problems, you can call us on our toll-free number +1-800-297-9982 and we will get back to you via online tech support service with the best customer care support solution at very reasonable charges.


How to Configure HP LaserJet 1010 to Windows 7?

HP LaserJet 1010 is launched before the launch of MS Windows 7 OS. Because of some compatibility errors installing the printer driver of HP LaserJet 1010 on MS Windows 7 OS is a little bit difficult but not impossible to configure HP LaserJet 1010 to Windows 7.


Instructions to Configure HP LaserJet 1010 to Windows 7

Part 1: Connect HP Printer to Your PC

  • Connect your HP LaserJet 1010 printer with your PC by using the USB data cable.
  • Switch on the printer.
  • Then click at the Orb button.
  • Choose “Control Panel” and click on “Devices and Printers.”
  • The next step is to click on “Add a Printer.”
  • Select “Add a Local Printer.”
  • Choose “Use an existing port.” And then choose “DOT4_001” from the alternatives.
  • Then click at “Next” to visit the next page.

Part 2: Configure Settings

  • Choose “HP” from the manufacturers list. Then choose “HP LaserJet 3055 PCL5”.
  • Choose “Use the driver that is currently installed and click at “Next” to proceed.
  • Then input the name you wish to utilize for your printer.
  • Select if you wish to share the printer or not. And select whether to set it as the default printer.
  • The final step is to click at “Finish” to finish the settings.

In case, you need quick online technical support for HP printers. Our HP helpline +1-800-297-9982 (toll-free) number available round a clock for different models of HP printer.

Disable Auto Sleep Mode in Windows or Mac

How to Disable Auto Sleep Mode in Windows or Mac?

This write-up will guide you that how to disable auto sleep mode in Windows & Mac computers. In case, you need expert professional assistance, then you should also contact our tech savvy technician for Disable Auto Sleep Mode in Windows or Mac at +1-800-297-9982 (toll-free) number.

Disable Auto Sleep Mode in Windows or Mac

Extensively Used Methods to Disable Auto Sleep Mode in Windows & Mac:

Method 1: Mac OS X

  • Select “System Preferences” by clicking at the blue/black apple icon in the top left corner of your computer screen.
  • Choose “Energy Saver” option in the Hardware section.
  • Also ensure that the setting for drop-down menu box is set as “Power Adapter”.
  • At the “Sleep” tab, you need to move sliding bar named “Put the computer to sleep when it is inactive for: as “Never”.
  • This option is only applied if you own an older version of Mac OS X.
  • The latest version of Mountain Lion (OS X 10.8) does not have this feature.

Method 2: Windows 10

  • Visit the start menu and input “Power Options” in the search box and then push the “Enter” button.
  • At the Left side you need to click at the panel “Change when the computer sleeps”.
  • The next step is to click at the drop-down menu box which shown “Put the computer to sleep and choose “Never”.
  • The final step is to click at “Save changes”.

Method 3: Windows 7

  • From the start menu, go to the Control Panel and from there you need to click at Power Options.
  • In the power schemes tab, you require to choose Home/Office Desk in the Power Schemes drop-down menu box.
  • The next step is to choose “Never” in the box named “System standby”.
  • The final step is to click at “OK” to save the settings.

Call our HP Computer Support Number @ +1-800-297-9982 Right Now to Get Instant Help


How to Install HP Printer Driver in Ubuntu Linux OS?

If you own a HP printer and wants to install it on the highly popular Linux Distro Ubuntu then take a look at this tutorial. In the Ubuntu Linux OS, the way of installing the HP printer driver is totally different from the MS Windows OS.


If you face any difficulty to install HP printer driver in Ubuntu Linux OS or need any kind of technical support relating to any kind of issue arising in your HP printer, then get in touch with us at our HP Printer Technical Support Number  +1-800-297-9982.

Steps to Install HP Printer Driver in Ubuntu Linux OS:

  • Download the HPLIP (HP Linux Imaging & Printing) Software. The extension of this file is “.run”
  • Open the terminal window in Ubuntu by simultaneously pressing the keys CTRL+ALT+T and input the commands:

                Cd HP




Input your password

  • Here HP is the name of the folder which contains the installation file of the HPLIP. To select the automatic installation mode, input the following commands and press enter after each command to verify. Input your password. To install and remove type i, input I at the terminal.
  • Wait for some time for the process to be finalized, watch the dialogues in the terminal and input the y for yes and n for no. Just input the y, n, i according to your selection, until you saw the message “Successfully Installed”.
  • Now Input R to restart the computer. When the computer is restarts, a tiny HP blue color icon will display in the menu bar. Congrats! The HP printer driver is installed in Ubuntu.
  • Download and install the plug-in, for this you need to double click on the blue icon. A dialogue box will display on the computer screen.
  • Activate the radio button. You can now use your HP printer for printing work after the installation of the plug-in.

Hope these steps works for you to easily Install HP Printer Driver in Ubuntu Linux OS. If you are still unable to do by own, dial our HP Printer Customer Support Phone Number +1-800-297-9982.