Monthly Archives: October 2017

For HP Technical Support, Call Us Now :

31Oct/17
Fix Cartridge Issues Of HP Deskjet F4200 Printer

How To Fix Cartridge Issues Of HP Deskjet F4200 Printer?

HP are widely accepted and a well-known printing device but issues may arise unexpectedly and here HP Printer F4200 comes under this problem. The cartridge issue may arise due to improper installation of the ink cartridges inside the printer device. So here we will make you aware of various solutions which will help users fix cartridge issues of HP Deskjet F4200 printer.

Cartridge Issues Of HP Deskjet F4200 Printer
Solutions to troubleshoot cartridge issues of HP Deskjet F4200 printer.

Solution 1: Try our first solution to fix the problem

  • Make sure that the device is completely turned on.
  • Now, the next thing is simply to open the print cartridge door carefully.
  • Move the print carriage to the far right side of the device carefully.
  • Perform a thorough check to ensure the correct use of HP print cartridges for your device.
  • Now, check for a list of compatible print cartridges which will well adjust to the device
  • Users are suggested to remove all the black print cartridge from each slot which is located on the right side. Make sure not to touch the ink
  • Nozzles or even the copper-colored contacts should also not to be touched by a user. Check for all possible damage to the copper-colored contacts as well as in ink nozzles.
  • Make sure that the clear plastic tape has been removed completely form the printer. If it is still there then, remove it gently with a clear plastic tape by using the pink pull tab. Make sure not to remove the copper colored tape which contains various electrical contacts.
  • Now, re-insert the print cartridge by gently sliding it bit forward into the slot which will be found located on the right side. Now, push the print cartridge little bit forward until it clicks into the socket.

Solution 2: In case if the first solution did not work out

  • To determine which print cartridge is having the problem, make sure that you have performed following below steps;
  • Your printer product should be turned on.
  • Open up the print cartridge door carefully to move the printer cartridge to the far right side of the device.

I hope both the above solution will solve the issue, but if it does not the, follow at our below contact details now

Call us at HP Printer Support Number to experience instant solution for every issue

HP-Technical-Support-Phone-Number

We are backed by a thorough, skilled and certified technicians who are always available at HP Printer Customer Support Number to bring users the most absolute solution for their issues. Baked by a team of extremely qualified technicians, we have established ourselves the most unique tech support providers chosen by thousands of customers across the country.

28Oct/17
Fix HP Printer Error Code

How To Fix HP LaserJet Pro 400 Printers Error Code 79 ?

The error message usually occurs while printing job and is found to be corrupted. Also, the issue is a result of miscommunication problem between the spooler as well as the printer because firmware is obsolete. And as a result, it keeps getting error code79 which is a service error. Below are steps to fix Error 79 of HP LaserJet Pro 400 Printers.

 fix-Error-79-of-HP-LaserJet-Pro-400-Printers

Steps to Troubleshoot to Fix Error 79 of HP LaserJet Pro 400 Printers

Step 1: Switch off the HP LaserJet Pro 400 Printer

  • The very first thing is to check and then, remove all your printing jobs from the computers that have access to the network printer. Now, in the domain network area, users need to check who owns each of these printing jobs.
  • The next thing which users need to do is to log in to each of those accounts and try to remove them from the domain network.
  • If it is the case where you are still able to cancel the print jobs via specified accounts then, remove and add the HP LaserJet Pro 400 from the list in the “Devices and Printers” section.
Related Blog: How To Fix HP Printer Error Code OXC4EB9343 ?

Step 2: Switch on the LaserJet Pro 400 Now.

  • This is a substitute of the first solution where users need to make sure the printer is well connected to the internet. For this one should have an Ethernet cable connection running smoothly from the device to their switch or to router or even to modem.
  • Next in the M401dn control panel or on the screen section, just click on the “Network” icon.
  • Check for an appropriate IP address on the printer to see whether it is displaying 192.168.XXX.XXX or not? It defines that you are well connected to the home network. Otherwise, check for manual guidance
  • Go back to the home screen section and then, tap the “Settings” icon.
  • Now select the LaserJet Update option and check for any of the firmware updates to ensure that it has the latest version.
  • Continue further by selecting the update icon and then, download as well as install.
  • After you have installed the firmware, you should be able to print again. Else rebooting of the HP LaserJet Pro 400 first to fully activate the new updates is highly recommendable. At last, do ensure that the toner cartridge is not empty to avoid another printer hassle.

HP-Computer-Support-NUmber-Banner-2

Call us at HP Printer Support Number for the Fastest Ever Solutions

Get in touch with us at HP Printer Support Number +1-800-297-9982  to experience our world-class support solutions. We are engrossed with rich team of expert technicians working 24*7 hours to assist its customers in bringing the most appropriate solution. So, for any such issue, call us now and fix your problems now.

26Oct/17
Fix Pen Failure Error in HP Printers

How to Fix Paper Jamming Issue in HP Printers?

When working with HP Printer, and printing a document from printer ends up clearly unsatisfactory when the sheet stuck into the roller, and the printer stops printing, and the situation turns out to be error message ‘Paper jam’. Paper Jamming Issue in HP Printers some irritating the users or bother to works due to printer stops feeding page or print. There are several causes could be possible to the occurrence of this paper jamming issue, includes as Damaged Paper, Use of the Wrong Tray, Incorrect Loading of Paper, Paper Overload, and Dirty Printer, etc. Then don’t worry about anything. Here, the blog will explain you very simple solutions on How to Fix Paper Jamming issues in HP PrintersSo just follow the below steps to quickly get rid the issue.

Fix-Paper-Jamming-Issue-in-HP-Printers-1

Solutions to Fix Paper Jamming Issue in HP Printers:-

Solution 1: – Turn Off your HP Printer Off

First of all, you should try to unplug the power cord of printer or turn off your HP Printer in order to settle the issue physically. There any setback can occur which may damage physically because of the power supply. In such situation, printers are incredibly cutting as they are overheated because of laser light checking and if the paper is stuck in a laser printer. Then you should hold up till it cools down. Make sure that there does not to touch any part to maintain a strategic distance from torches, and when it cools, you can open the back front of the printer to expel the papers:

Follow the Steps to Turn Off your HP Printer Off:-

  • Unplug the power cord from the back of the printer, while the printer is ON,
  • Then wait some time, at least 1-2 minutes.
  • Next, plug in the power cord to the printer.
  • If the printer does not power on automatically, then press the “ON” button to do so.

If the HP Printer Paper Jamming error is still displaying, then go to the next solution.

Solution 2:- Open HP Printer’s Back-Cover

You have required opening the printer’s back cover in order to enable papers to turn out by pulling physically. If you are unable to open such gadget, then you can use the client manual description which usually companies provide you, when you buy it. Otherwise, you can start by opening the jam clear cover at the back of the printer. Remove any jammed paper that is pushed out by the paper you inserted. Remove any jammed paper that is pushed out by the paper you inserted. Close the Jam clear cover at the back.  Now you are done.  If you have an issue, then you can call Dell printer tech support to get instant online help to this procedure.

 Solution 3:- Remove the print head and try again.

You should check the print head to Remove Any Jam Around. Lift the scanner cover into the open position by using your hands. Use your fingers to smoothly move the print head to ensure that there is stuck any paper in the area. In case, if you can’t see it, then use a flashlight to verify if there is something stuck in the printer. Then remove any piece of paper stuck inside your printer

Solution 4:- Clean the Print Heads

  • If you have removed the bulk of the paper, but still have printing issues, then try to run a print head cleaning process. This should get rid of paper microfibers clogging the nozzles.
  • Close all access panels and return all trays before you print again.

In case, you are facing the same issue, then immediately connect with the HP Customer Support professionals to help.

HP-Printer-Support-NUmber-Banner-2-1024x282

Dial HP Printer Customer Support Number to fix Paper Jamming Issues

Call at HP Printer Support, to obtain instantaneous online help. This number is a toll-free and accessible all the time 24×7/365 days to your assistance, and will easily connect you with our dedicated and experienced HP Printer Customer Support technicians. They will give you the comprehensive guide to fix this issue. Also, you can get the best troubleshooting steps to fix other kinds of HP printer problems. Hence, call now to our experts for further help to HP Printer queries.

25Oct/17
Fix Pen Failure Error in HP Printers

How To Fix HP Printer Error Code OXC4EB9343?

 This kind of HP printer error clearly indicates ink system failure messages with the error code 0XC4EB9343 on the ENVY 4500 e-All-in-One HP Printer. According to the study the error message occurs if all of the nozzles of the print-head are completely clogged or may be the print-head is completely a defective one. We have steps below to fix HP Printer error code 0XC4EB9343 with detailed explanation of each step.

fix-HP-Printer-error-code-0XC4EB9343

Steps to Fix HP Printer Error Code 0XC4EB9343

Step 1: Resetting the printer

  • The very first step is to remove the ink cartridges of the printer and then, resetting the printer will clear out this error message.
  • Turn the printer on now.
  • Wait until your printer move to its idle state and silent before continuing further.
  • Disconnect any attached USB cables from the rear end of the printer. If the printer has a network or even has a wireless connection then, leave it connected.
  • Remove the ink cartridges from the HP printer now.
  • With your printer turned on, simply disconnect the power cord from the rear end of the printer as well as from the wall outlet or even from the power strip if it is connected to it.
  • Wait for 60 seconds at-least
  • Plug in the power cord back into the wall outlet carefully.
  • Reconnect the power cord carefully to the rear end of the printer.
  • Turn the printer on if it does not seems to be automatically turned on.
  • The printer will now go through a warm-up phase and all of the lights will start flashing including the carriage which will start moving automatically.
  • Wait for its warm-up period to be finished. Further hold on until the printer is in idle state before proceeding.
  • Reinsert carefully the ink cartridges, and then shut off the ink cartridge access door.
  • If there is any kind of prompt message displayed on the screen to print a calibration page then, go for it.
  • If users have disconnected the USB cable then, reconnect it to the rear end of the printer.
  • Try to print now.

Step 2: Service your printer in normal state

  • If the previous steps did not resolve your problem then, it is recommended to service the printer now.
  • Service or replace the HP product if it is the case where you have completed all the preceding steps.

HP-Printer-Support-NUmber-Banner-2-1024x282

For more such queries, just dial us at HP Printer Support Number 

Connect to our technicians at HP Printer Support to fix more such issues by our technicians as and when needed. We are easily reachable for our customers 24*7 hours to assist them with all possible solutions. Our team is backed by thorough, skilled and certified technicians who are always a step forward to lend a helping hand to users. Call us and get your issues fixed up.

24Oct/17
Fix HP Printer Error

How To Fix HP Printer Supply Error Code 10.0000?

This is an uncommon issue which arises in HP Printers while users are working with it. Though it is well known that HP Printers are widely used devices by people across the world but it still comes up with unexpected and sometime a severe technical fault without any warning. One such is error 10.0000 which usually arises because E-label cannot be properly read and also printed cartridge is not accurately installed. Below we have two solutions to fix 10.0000 Supply Error in HP Printers.

Solutions to Troubleshoot 10.0000 Supply Error in HP Printers

Fix-10.0000-Supply-Error-In-HP-Printers-1

Solution 1: Re-installing the Cartridge

  • Open up the front cover of the printer and carefully remove its print cartridge attached to it.
  • Now, thoroughly inspect the print cartridge just to ensure that the e-label reader is properly attached at the back side of the print cartridge. Make sure that it is not damaged because e-label reader is an entire combination of a small green microchip which can be found at the back of the cartridge with a sensor inside the printer.
  • Inspect deeply inside the printer just to verify where the e-label sensor is having any product packing tape still attached to it. Look for any kind of obstruction that may happen in the sensor.
Related Blog:- How To Fix HP Printer Error Code 0xc19a0043?
  • Users are recommended to inspect the e-label microchip which is located on the cartridge. This is to ensure that all of the gold contact points are not damaged or even bent. Now, inspect that the black plastic on e-label reader ensure whether it is bent or broken.
  • Reinstallation of the print cartridge is recommended.
  • Now, power cycle your all-in-one printer.

Solution 2: If the above solution does not solved problem then, apply this method

  • Users of not satisfied with the earlier solution are recommended to replace the printer cartridges carefully. This will solve the issue.

HP-Printer-Support-Phone-Number-2

Call us at HP Printer Support Number for solving all HP Printer issues

Get in touch with us at HP Printer Customer Support Number +1-800-297-9982  where technicians are always available for their customers to help them out in resolving a wide number of printer problems at fraction of seconds. We are backed by exceptionally rich, competent and skilled technicians who are always a step ahead delivering the most appropriate answer to your HP printer technical problems.

22Oct/17

How To Fix HP Envy Error Code OX02b7c2ed? Quick Hacks

Fix HP Envy Error Code OX02B7C2EDHP Laptop are widely used devices by users across the world. But it has become more prominent in these recent years due to its advanced working functionality which it holds. But inspire of its well-known architecture, the device may sometimes suffer from severe error issues and one such among them is error OX02b7c2ed. This is an error problem which occurs when there is a defect while the power button is flashing and as a result you come across error OX02b7c2ed SM_MODULE C. our top expert technicians have discussed solutions to Fix HP Envy Error OX02B7C2ED with appropriate explanation of each of them.

fix-HP-Envy-Laptop-Error-OX02B7C2ED

Solutions to Troubleshoot HP Envy Error OX02B7C2ED

Solution 1: This process will entirely deal with a hard reset mode to solve the problem

  • Users while dealing with this error should first leave the printer on and unplug the power cable from the printer as well as from the wall outlet for at-least 60 seconds.
  • Now, carefully reconnect the appropriate power cable to your printer device as well as to the wall outlet but not in the surge protector. This process will further ensure that the printer is receiving full power supply.
  • The last step is to make sure whether the printer is properly connected to a wall outlet. While checking out this step, make sure that you are not using the power bar or even a surge protector.
Related Blog: How to Fix Error 14 And Error 16 in HP Printer ?

Solution 2: If the above solution did not work out for you then, try the second one described below

  • Make sure all of your printer cartridges are well compatible to the device
  • Now, carefully remove, inspect, and then, reseat all of your printer cartridges
  • The next thing what a user need to do is to remove as well as reinsert all printer’s cartridges carefully
  • Clean out your cartridge contacts now and restart the printer device
  • It is advised for users to identify all the cartridge for the purpose of replacing it
  • Load all of the paper and then, replace your printer cartridge
  • At last, your printer is ready to work back in normal state.

Fix HP Scanner Error

Get Connected to our Technicians for resolving all HP printer issues

We are a renowned and a highly known tech support provider who works 24*7 hours at HP Envy Printer Technical Support to bring them world class solutions matched according to industry standards.  Backed by a team of talented, skilled and enthusiast technical team, we deliver the best possible solution to your issues. So, call us and get your queries resolved for HP Printer issues

16Oct/17
HP Error

How to Fix HP Printer Error 14 And 16

HP printers are widely preferred printing devices preferred by thousands of users but sometimes it may come across unexpected error codes namely error 14 and error 16. There are a wide number of reasons why these error codes may occur. The error code 14 is due to faulty paper control PCA which is a board mounted to the DC power supply and is located at the extreme right front corner of the printer device.  While on the other hand, the error code 16 generally occurs due to empty toner cartridge or may be the toner in cartridge is not placed evenly. Below are steps to Fix Error 14 and Error 16 in HP Printer with detailed explanation of each step.

fix hp error 14

Steps to Troubleshoot Error 14 And Error 16 in HP Printer

Solution to Error Code 14 in HP Printers

If you see that there are no toner cartridge or even if the cartridge is not fully placed then, it is advised to pull it out and then, install it again. Now, on the IIP/IIIP, connections for high voltage are completely made which is located towards left side of the printer for easy installation process of the cartridge.

Now, press all spring contacts for some time and look for micro switches where a clicking sound can be heard. Users need to ensure that at least one of the two drum sensitivity tabs are present. The next thing is to perform a check of the toner cartridge micro switch on the high voltage PCB – SW501. It is advised for users to check the door to open the sensor (PS402) which is located on the terminal board just under the transfer roller.

Related Blog: How To Fix HP Printer Error Code 0xc19a0043 ?

Solution for Error Code 16 in HP Printers

To get rid of the issue, just shake the toner cartridge from side to side and from front to back section. This can generally have 100 or even more pages. If you have bad or even dirty cartridge contacts then, look for various conductive contacts on the cartridge and also for corresponding contacts in the printers. Make sure that they are cleaned and free from unwanted particles. Perform a check for any defective high voltage power supply to remove the issue completely. Now, carefully check for open door sensor flag which is PS1. Check for a toner level sensor as well as the toner cartridge itself for any kind of damage. Since the issue can also be caused by defective DC controller, you check for it once. Users can also perform this action by substituting a good DC controller.

HP-Printer-Support-NUmber-Banner-2-1024x282

Call us at HP Printer Support Number to Resolve More Such Problems

Get connected to our technicians at HP Printer Customer Support Number to fix all your critical to critical problems with the most right kind of solution delivered by our technical team. We are backed by thorough, competent and skilled technicians who possess deep know-how in solving the complex kinds of issues. For any kind of issues further, we encourage you to call us anytime as and when needed.

15Oct/17
Fix Error OXC4EB827F In HP Envy 4500 Printer

How To Fix HP Printer Error Code 0xc19a0043?

This is a kind of Ink System Failure error message which displays as a numeric code including alphanumeric code.  Users will get displayed with such issues on the printer control panel and even in the computer devices as well. These errors begin with ‘0x…’ letter while there are other such error codes which begins with ‘B’ or ‘C,’ There exists various reasons of this issue such as defective in the genuine HP ink cartridges, issues while resetting the printer device and problems related to ink levels of the printer. Below are steps to fix HP Printer Error Code 0xc19a0043.

fix-HP-Printer-Error-Code-0xc19a0043

Steps to Troubleshoot HP Printer Error Code 0xc19a0043

Step 1: Work with the Genuine HP ink Cartridges

  • Go to appropriate website and then, select the “country or region.
  • Follow all the on-screen instructions to work with the printer carefully and then, check for cartridge compatibility with the printer.

Step 2: Reset the Printer Now

  • Turn on the printer and check whether it is on.
  • Wait till the device becomes an idle.
  • Now with the printer turned on, you simply need to disconnect the power cord from the rear of the printer.
  • Unplug the power cord and wait at-least 60 seconds.
  • Plug in the power cord into the wall outlet.
  • Reconnect the power cord to the rear of the printer device
  • Turn the printer on and wait till has approached into warmed-up period
Related Blog: How To Fix HP Printer Error Code 30040079?

Step 3: Check for all Estimated ink Levels

  • Clean out the ink cartridge vents as well as the contacts
  • Gather all types of materials needed to fix the problem
  • Turn the printer on and then, open the ink cartridge access door carefully
  • To remove the ink cartridge, you simply need to press the tab which is in the front section of the ink cartridge to release it. Place your ink cartridges on a clean paper with the help of ink opening pointing towards upside
  • If you can see that an orange tab is well attached to the ink cartridge then, just remove it.
  • Examine all the vent areas that are located on top of the ink cartridge ND which is just next to the HP logo.
  • Make use of a pin to just clean the vents out and check whether any of the ink cartridges have clogged vents or not?
  • Work with a fresh piece of cloth to wipe any ink deposits.
  • Carefully reinsert the desired ink cartridges into its slot and scroll your finger at the top of the ink cartridges.
  • Close the ink cartridge access door and then, check for the printer control panel display section for any type of error message.
  • Clean out all the printhead with an automated tool
  • Replace the print head at last

HP-Printer-Support-Phone-Number-2

Call us at HP Printer  Customer Care Number and fix your problems faster

We encourage users to get connected to our technicians at HP Printer Customer Care Number +1-800-297-9982 to fix all your related issues by experiencing the best-in-class solutions available with us. Our team is truly backed by rich and competent technicians who have capability to resolve every complex to complex issue at a go.

14Oct/17
HP Error

How To Fix HP Printer Error Code 30040079?

The issue in HP device generally executes while the USB installation in Windows XP system is taking place by displaying a message as ‘Error Situation Code’ followed by  error messages in numeric form as 30040079, 11135074 and 04060047. Below are steps explained to fix HP Printer Error Code 30040079.

fix-HP-Printer-Error-Code-300400791

Steps to Troubleshoot HP Printer Error Code 30040079

Step 1: Un-installation needs to be done for the failed installation

  • The very first step is simply to remove all partially installed software to make sure that problems don’t arise further
  • Click the “OK” button to close the error message dialogue first and tap the “Next” button in the Error Reporting section
  • Now, follow all on-screen instructions to remove various unsuccessful software installation files.
Related Blog: How To Fix HP Printer Error Code 41.5?

Step 2: Installation of the Printer Software

  • If users have the HP software CD installed in then, they are requested to carefully insert the CD inside the CD drive of the computer device. Follow all on-screen instructions to easily install the software else, go for download steps and then, install the software from appropriate website.
  • Turn on the printer device to check whether the printer is well connected to the computer with the help of USB cable or not? Now, carefully disconnect the cable from the printer.
  • If prompted, select a method to identify the type of printer’s model by following all on-screen instructions to get access to the download page.
  • Click the “Download next” icon to the full feature driver which is highly recommended for users by professionals. You can also tap the “Basic Drivers for other driver” options as well.
  • When you are prompted by the “Overwrite Protection” feature while the installation process is on, click the icon which shows “Yes to all”. The installer further needs to carefully overwrite few driver software components that are left inside the computer from all the failed installation.

HP-Printer-Support-NUmber-Banner-2-1024x282

Call us at HP Printer Support Number to fix your problems instantly

Get connected to us at HP Printer Support Phone Number +1-800-297-9982  to fix all your queries at a go. We are available 24*7 hours a day to assist you the most appropriate solution delivered by our technicians. our team of technicians are backed by thorough experience and are competent in resolving world-class support solutions.

11Oct/17
Fix HP Error Code 0x610000f6

How To Fix Printer HP Error Code 0x610000f6?

This is an error which happens due to either carriage jam or even due to paper jam issue which gets displayed in the control panel section. While this error is in process, you will get to see that the light is blinking continuously to indicate paper jam problem. Users at this point of time won’t be able to print further. One can also get this message displayed as a ‘0x61xxxxxx’ numeric number where ‘x’ is any letter or a number. Below are solutions to fix HP Printer Error Code 0x610000f6.

 HP Printer Error Code 0x610000f6

Steps to troubleshoot HP Printer Error Code 0x610000f6

Solution 1: Try out this method to get rid of this problem

It suggested to remove the ink cartridge, and perform a proper power reset of the printer. Now carefully disconnect the power cord from the printer device as well as the power outlet section. Users are advised to wait at-least for 60 seconds and then, plug in the printer device. Ensure that you have completely plugged in the printer to a wall outlet directly. At last, you need to make sure that you have bypassed any sort of surge protector or even the power bar.

Solution 2: If the above solution does not work then, try this out

If the printer is in dirty state then most probably it will cause a serious issue. The decoder strip is a long white plastic strip format which is just located inside the carriage to make it run across the device. Open the door now and look for inside to the back of the device where you will come across severe damage. Here you need to clean it out completely with a soft piece of cloth and use it to gently wipe the strip clean as much as possible.

It will solve all your queries at once. If not then, proceed at below section

HP-Printer-Support-Phone-Number-2

Call us at HP Printer Support Number and fix your problems

Get connected to our technicians at HP Printer Customer Support Number to fix your problems on immediate request. We are available 24*7 hours a day to assist you in solving all types of issues related to it. Get our world-class support solutions instantly by simply dialing us at below appropriate number.