Monthly Archives: January 2018

For HP Technical Support, Call Us Now :


How to Fix HP Battery Alert Error Code 601 Disable

The aforementioned error code is a symbol of HP device battery issue which occurs when the battery power is too low. So, to Fix HP Battery Alert Error Code 601, it is sometimes needed to approach for a professional help which can also be availed at HP Customer Support Number. Before moving to solutions, let us discuss about the issue more. The battery storage capacity is an amount of energy the battery will store to power a portable device like notebook computer. However, lower the storage capacity of a battery, the shorter time it will power any portable device. Thus in this case, all of the rechargeable batteries will eventually lose its storage capacity. This loss is known as aging process which is irreversible and cannot be restored further. So, higher storage capacity of a battery basically varies from devices to devices after one year of use

Fix HP Battery Alert Error Code 601 Disable

Here are Steps to Fix HP Battery Alert Error Code 601 Disable

Work as per below instructions as suggested by HP Online Support technical team to get rid of the issue in easy way:

Method 1: Try This Solution First

  • Press and then, hold the power button for at least five seconds to switch off the computer device.
  • Turn on the computer and press the F2 key on repeated basis and it should be followed only once in every second till the HP PC Hardware Diagnostics UEFI menu is displayed automatically.
  • Click the “Component Tests” which is found in the main menu
  • Now, in the list of “Component Tests” section, click to choose the “Power’ button.
  • Navigate to the list of “Power Tests” and then, click the “Battery” icon
  • In the Battery Test, just click on “Run once” icon to begin with your Replace the CMOS Battery Test process. It will take almost about two minutes. If needed, users may take up-to 2 to 4 hours. Now, cancel it any time by pressing the “Escape key (Esc)”.
  • Once the testing is done, the first line on the Battery Check page will be displayed which will show the status battery condition. If it has passed the test then, click on “Main Menu’ or just click the “Battery Details” for more data.
  • If the process has failed then, check the below table suggestion. Now, write down the battery status as well as the Failure ID.
Related Blog: How To Fix HP Error 651 in Windows 7/8 and 10 ?

Method 2: This Method is Based on Manually Mode.

To do this, perform below steps as instructed

Step 1: Charge the battery first

Step 2: The next step is to discharge the battery

Step 3: Users are now advised to recharge the battery to 100%

Step 4: At last, just run the battery test process.

HP Customer Care Service

Connect us at HP Customer Support Number for World-Class Solution

Get in touch at HP Customer Care Service to help us resolve you issues with the most appropriate choice of solution at your desk. We are available 24*7 hours to assist users in fixing up unexpected error in HP CMOS Battery in the HP Pavilion issues anytime anywhere. Feel free to connect us anytime and get hassle free solutions as and when requested.


How to Fix HP Hard Disk Error Code 301?

An unexpected failure message due to hard disk drive or solid state drive after user turn on the PC, laptop running on Windows, Mac OS X Operating System is represented by 301. To Fix HP Hard Disk Error Code 301 which at times displays uncertain error message. The message says as follow: “The Smart Hard disk check has detected an imminent failure. To ensure no data lose please backup content immediately and urn hard disk test in system diagnostics. Hard disk 1 Smart want to continue press enter”. The error 301 symbolizes a failure in device which could have been taken place of expecting failure. The error arrives when PC is trying to boot. The major causes to HP Error Code 301 include:

  • SMART hard disk check has been failed and asking user to replace drive
  • If after replacing the drive still user faces issues possibility of mother board has broken IDE/SATA controller chip. And any hard drive user connect it will show the error over and over again
  • After booting into Windows could also be spyware, malware effect that pretends SMART HDD error to be real
  • Physical problem in hard disk which is going to fail soon and needs to be replaced.

Fix HP Hard Disk Error Code 301

Steps to Fix HP Hard Disk Error Code 301:-

Step 1: Removing the Hard drive

Step 2: Reconnecting again

Step 3: Under the advanced diagnostic test which is run on hard drive and let it complete fully

Related Blog: How to Fix BIOHD 8 Error HP Windows 7 ?

Step 4: After the successful test if system still opened with 301 error then user for sure replace the hard drive.

Along with this user can also use ‘chkdsk’ command in Windows OS that can scan, diagnose and repair the bad sectors in the hard drive. It also create and display a status report for current disk based on file system. The command also list and corrects the error 301 occurred as of disk.


For More Reliable Aid Connect to HP Support Phone Number +1-800-297-9982 (Toll-Free)

The above process, steps might take several minutes depending upon the size of user’s hard drive. If even after following all above explained solutions, the problem does not resolve, then user can contact HP Support Number +1-800-297-9982 (toll-free) to repair HP Hard  Disk Error 301 and more help. Apart from this, user can also use reliable Windows disk recovery software that recovers the user’s precious data from an inaccessible, damaged hard drive.


How To Fix HP Error 651 in Windows 7/8 and 10?

HP products, especially when we look at the laptops and computers, is often discovered to be troublesome to the users with its connectivity issues. The HP Error 651 is the most prevalent issue that you may often face. Such error issue appears mostly in the 7th, 8th and 10th version of the Windows operating system.

The central objective of our write-up is to satisfy our viewers with the ultimate sources and the solutions of the error. You may even have a trial of all the other local databases that are easily accessible. But most of those sites generally lack authenticity. Hence, it is very much risky and uncertain to follow them up with such topics.

We, therefore recommend you to go through the entire article at the end of which we hope that you would be recovered from the situation that you are in.

All that you will have to do is to follow our instructions are present in the under-mentioned points. Hence work accordingly with your technical grievance efficiently eliminate the HP Error 651 in Windows 7/8 and 10.

The aforesaid error code occurs when users are trying to establish an internet connection with the help of PPPoE. So, one needs to Error 651 in Windows 7/8 and 10 with the help of HP Online Support professional team immediately. While this error occurs, users will be displayed a message as “Connections failed with error 651”. Follow methods to solve the problem faster.

Precise Analysis | HP error 651:

When your Windows OS, irrespective of the versions that you are using, fail to establish an effective network connectivity the issue takes place. Trying for the establishment of internet connectivity but achieving failure is the cause of the alert. Breakdown of the server connection by utilizing PPPoE or any other similar issues are responsible for putting your device linkage under the severe problem.

Many a time, internet service providers are responsible for the HP technical drawback.

However, there lie precautions for the proper redressal of the difficulty. Following those measures, you will again be able to bring your device back to its initial condition.

 Fix HP Error 651

Here are Steps To Fix HP Error 651 in Windows 7/8 and 10?

Method 1: Restarting the device in safe mode

  • While users are working in the Safe mode, they need to press and hold the “Windows” button as well as the “R” button.
  • A “Run” command will automatically get displayed.
  • The next step which users need to do is to write in the “Run” window the “MSCONFIG” command
  • Press the “Enter” button which is there on the keyboard.
  • However, another window will appear and where users are supposed to left click on the “Boot” tab which can be found on the upper side of that window.
  • Users will automatically come across a “Boot options” where they need to click on the “Safe boot” icon.
  • Perform a thorough check of the box which is just next to the “Network” option just under the “options” section of the page.
  • Reboot the HP device as suggested by HP Support Helpline Number professional team. Perform as deep check whether the error code still exists or not?
Related Blog: How to Stop HP Computer from Overheating ?

Method 2: If the Above Solution did not seem to be Working out then, Try this one:

  • Press and hold the “Windows” button and then click the “R” button.
  • In the “Run” window, please enter the “MSCONFIG” command.
  • Press the “Enter” button and then, left click on the “Boot” option
  • Uncheck the box which is easily found just next to “Safe mode”.
  • Left click on the “General” option now.
  • From the features section, navigate to the “Selective Startup” icon
  • Uncheck all features to clear out the selections made by you completely.
  • Left click on the “Services” feature and then, again click on the “Disable all” option.
  • Click to choose the “Startup” option and then, disable each item which is there in the list.
  • Reboot the HP device now.
  • Once done, you will see that the device reboots again to the “MSCONFIG” window as done above
  • Left click on the “Services” option and again right click the “Hide all Microsoft services” feature.
  • Users again are suggested to left click on the “OK” button and reboot the device again.
  • Perform a proper check to see if still the issue persists
  • Left click on the “General” tab icon and choose the “Normal Startup” option.
  • Perform a reboot process of the device again

Alternate Productive Measures | HP Error 651 in Windows 7/8 and 10:

There is a lot of safety measures to treat the HP Error 651 in Windows 7/8 and 10. We have come up with an extremely user-friendly approach while constructing our effective suggestions. So, it will be less problematic for you in comprehending the solvable operation.

Technique 1:

Carry out a safe reboot in the Windows version 8 and 10. Then, you will have to log in the safe mode along with the feature of networking. And carry out the following modifications:

Hold on to the Windows and the “R” button while your device is under the safe mode. A “process” section will pop-up. Then type “MSCONFIG” under the “run” section. Then confirm it by “entering” on the keyboard.

Now, a new window will prompt, and you will be required to left click on the “Reboot” tab. The “Reboot” tab is present on the upside of that same window. Within the boot option, you will have to select and click upon the “Safe mode” box. Then, examine the section that is present just next to the “Network” right on the same window page.

Finally, startup your device Windows. Then verify if you still have the same trouble regarding the error 651.

Technique 2:

Try to disable all the initial settings of your HP device.

Similar to the first method, hold on to the Windows and “R” button. Enter “MSCONFIG” under the “Run “ window. Press the “enter” button from the keyboard. Then left click on the tab “Boot”. Ensure that the safe mode section is unchecked. Left click to open up the “General” tab.

Opt for the selective startup feature from under the general tab. Clear out all the specifications under selection from “check” to “uncheck”. Select the service option by clicking left and do the same click again to disable out all the rest of the options.

Then choose to startup and uncheck each of the items that are present in that list. Boot up the Windows device. Move on to the “MSCONFIG” section like you have seen above. Click on the service section and mask all the supports of the Microsoft characteristic. Left click on “OK” box and restart your device again. Analyze whether if you still have the error issue or not.

If no such error exists, then probably those were the startup applications to result in the 651 error. However, if the problem still subsists, then you will have to again move on to the “MSCONFIG” window. And then follow the steps back from that stage again.

Hence, these are only a few from the long list of other effectual techniques. You can avail of the rest of our IT solutions by contacting us if you are not successful with the application of the above steps.

HP Printer Setup without CD

Call +1-800-297-9982 Get in Touch with our HP Customer Care Service Team for Solving more such issues

Connect to HP Customer Support professionals for immediate solutions to every type of issue at your desk. We are available for users 24*7 hours to help them solve out the problem with the most suitable choice answer. Call us anytime and experience hassle-free service delivered by our technical team.

If you want to get rid of your issue being incessantly troubled with your HP laptop or computer, you can easily contact us via our contact number. We are available to serve you the best we can. Else, you may simply email us at our HP Support ID. Mail us about the shortcomings and let us know how it shall be convenient for us to guide you.

We do not compromise on the quality of our service and professionalism at the cost of anything. Therefore, we offer complete assurance regarding the ultimate settlement of your problem with time-bound solutions.

HP Printer Errors

How To Fix HP Printer Error 0x61011bed?

This particular issue is a result of the faulty cartridge when you were changing the printer’s cartridge. When this error occurs, users will be displayed with an error message. However, there are other reasons for this error that include block contact cartridge issues. The third reasons is due to “Out of Paper’ problem which appears on the computer and the device will stop responding further. Follow steps below to Fix HP Printer Error 0x61011bed.

 Fix HP Printer Error 0x61011bed

Here are Steps to Fix HP Printer Error 0x61011bed:- 

Step 1: Resetting the Device

  • Without switching off the device, just remove the power cord carefully from the back of the printer.
  • Wait at-least for 30 seconds and then, plug the power cord into printer device
  • However, if the device is not already switched on then, work with the “On” button to turn it on.

Step 2: Check for Any Kind of Paper issue and Reload it

  • Replace the effected paper to ensure that all of the paper is of same size as well as type. Because according to the HP Printer Support technicians, only one type of paper can easily be used in the product simultaneously.
  • Click the stack of the paper on a flat surface to easily align the edges.
  • Make sure that the stack of paper should have 10 papers but it should be below 25 sheets of paper.
    Insert the paper stack into the device and carefully push the paper guides against the paper.
  • However, one should ensure that paper is completely inserted into the product properly and can be picked up by the paper rollers easily.
  • Try printing again
Related Blog: How To Fix HP Printer Error Code 2753 ?

Step 3: Now, Adjust All of the Paper Settings in the Print Driver 

  • The paper settings in the print driver should be able to match the paper settings for at least one of the paper trays installed in the device.
  • Open and get access to a document in the program which should be used to print.
  • Click the “File” icon and then, choose the “print” option. Click on the “properties” option now. Users will be displayed a “The product Properties dialog box” on the screen
  • Click the ‘Paper/Quality” icon and then, choose the appropriate paper size from the “drop-down” menu list
  • Choose an appropriate type of paper from the drop-down menu.
  • Click OK button and again tap the “OK” icon to print the document.

Step 4: Clean the Rollers

  • Turn off the printer device and then, unplug the power cord.
  • Open the access door to work with the rollers.
  • Clean out all of the rubber rollers with a soft piece of cloth.
  • Do ensure that any of the paper rollers that are there on the input tray are completely cleaned. Clean up the rollers with a piece of soft cotton
  • Close the access door to plug in the power cord carefully.
  • Try to print now.
  • Step 5: Service the product
  • At last, service the printer device


Connect to HP Printer Customer Care Service Professionals for World-class Solutions

Our HP Printer Customer Care Service professionals are always happy to assist customers 24*7 hours while delivering them the world-class solutions. We are backed by skilled and competent technicians who resolves issues from the core. Feel free to connect us anytime and we are right there for you.


How To Fix HP Printer Error Code 2753?

Users will come across this error code when they are making an attempt to install the HP software and at the same time they get a problematic message displayed as ‘Fatal error during installation”. This error clearly defines that the installer has encountered a serious unexpected issue while installing the package. The issue usually arises in the HP Single-Function as well as Multi-Function Printers during the HP Software installation done in Windows system. So, it is necessary to Fix HP Printer Error Code 2753 and below we have solutions to help users overcome this problem in an easy manner.

HP Printer Error Code 2753

Here are Solutions to Fix HP Printer Error Code 2753

Solution 1: Her users are Suggested to Re-Register the MSIexec Service. To do this Follow Below Instructions:

  • Click the “Start’ icon and then choose the “Run” icon where you will see that the “Run window” will open automatically.
  • In the “Run window”, just type the command “msiexec/unregistered” and click OK. The Run window will then close automatically.
  • Try to perform the installation again.

If the above solution does not seems to be working out then, try our second solution.

Solution 2: Here Users Should be Given Full Permissions to Access the Program Files folder

Follow below guidelines as instructed by HP Printer Support expert technicians:

  • Click the “Start” icon and then, right-click “My Computer”. Next you need to click the “Explore” icon.
  • If necessary then, click the “plus sign (+)” button which is located just next to the “C:” drive to expand the list of options.
  • Right-click the “Program Files” and then tap the “Properties” icon. The Program Files Properties window will open now.
Related Blog: How To Fix Cartridge Issues Of HP Deskjet F4200 Printer ?
  • After navigating to the “Attributes” section, click to clear the “Read-only” check box icon. If the box is already cleared off then, close the “Properties dialog box” as well as the “Explorer window”.
  • Click the “Apply” icon and select “Apply changes” to this folder, subfolders as well as files. Click OK button now.
  • Perform the installation process again.

I hope all the above solutions will help you solve issues completely. But if the error persists then, approach us at below contact section.


Get connected to our HP Customer Service Team for instant Solutions 

Connect to us at HP Customer Support Number for instant replies to all your issues with excellent solutions matched according to latest market trends. We are available 24*7 hours to assist users anytime while delivering them promising results. So, feel free to contact us anytime.