Monthly Archives: March 2018

For HP Technical Support, Call Us Now :

HP LaserJet M1132 Printer Error E8

How To Fix HP LaserJet M1132 Printer Error E8?

The error only signifies that there is an issue with the scanner carriage. Once carriage movement starts, the printer will automatically respond to E8 light error. We recommend users to Fix HP LaserJet M1132 Printer Error E8 with apt guidelines by connecting our HP Printer Repair Support Service team. However, there are more causes which give rise to this problem.

Fix HP LaserJet M1132 Printer Error E8

Due to irregularity of the software or if there is any breakage visible in the scanner motor connection then, this error happens to occur. Also, the issue may be within the motor itself where the mechanism may have over involved. Probably, all of these problems have the most effective solutions. This failure may also attribute to problems within the mechanical parts of the device.

Steps to Fix HP LaserJet M1132 Printer Error E8

Step 1: The first and the foremost step is to place HP LaserJet Pro M1132 printer over a strong area which is well-lighted and ventilated. Now, take a screw driver, a clean rag and alcohol to deal with the issue

Step 2: Open up its main printer cover as well as the smaller inner over.

Step 3: It is advised by HP LaserJet Pro Printer Support experts to unlock the ink cartridge lever and hold its handle to easily pull it out.

Step 4: To resolve HP printer error code E8, have a look on the printer roller to unclip from the holder.

Step 5: Hold the roller tightly to clean the rag damped with alcohol and allow it to dry later. This will need a thorough cleaning process to remove dust, accumulated ink as well as other substances that is coating the surface.

Step 6: Now, carefully clip the roller back to its printer holder where a correct re-installation will give a distinct click because these rollers will set into position.

Related Post:- How to Fix HP Printer Error Code 409

Step 7: Make a proper turn of the printer sideways and check for the jack where it is there at the back side? If so then, remove these two nuts and pull out that jack.

Step 8: Clean out the black printer roller which is just there inside and all other parts too. Now, reinstall the jack with the help of the nuts. Reinstall these ink cartridges back to lock the lever down and hold it securely.

Step 9: Close the printer carefully and power it up. If this error light is blinking then, open-up the scanner cover and look for all drive gears. Users are advised to put oil on the drive gears and then, close the scanner.

Step 10: Power-up the printer again

Why you should choose our HP Printer Technical Support & solutions?

  • Award winning solutions
  • Small enough to care but large enough to deal with your problems
  • We deliver trusted and imaginative solutions
  • Customers can connect with us from anywhere
  • 100% guaranteed results
  • Customers’ feedback is always welcome
  • Solutions are value added and not bound with complications
  • Expert in handling even the toughest of issues


Get Connected to HP Printer Customer Support expert for world-class remedies at your desk

Call our technical team by dialing at HP Printer Support Number +1-800-297-9982 to troubleshoot HP LaserJet M1132 Printer Error E8 and fix such critical faults with world-class remedies. We are available for customers 24/7 to help them with possible solutions for issues confined to HP Printer technical glitches. Solutions are future effective to apply which has made us stand distinguished form other competitors. Feel free connect with us anytime and get hassle free solutions.

HP Printer USB Scanner Connection Error

How To Fix HP Printer USB Scanner Connection Error?

Error message occurs when users are incapable of finding the scanner or if it fails to perform scan process. To avoid future technical fault, fix HP Printer USB scanner connection error by approaching our expert team us to help resolve this issue in easy ways. While this error occurs, users will come across communication problems which may confined to HP imaging device, unable to detect the computer device, etc. Other issues such as scanning of any document won’t be available currently, unsuccessful scanning issues and yes, the scanner won’t be initialized are experienced. Let us see what solutions have been discussed to get rid of this common issue.Fix HP Printer USB Scanner Connection Error

Effective solutions involved to fix HP Printer USB scanner connection error are as follows:

Solution 1: Restart both the computer and printer

His should be done to restore lost scan connection and to do this follow below instructions explained by HP Printer Support team:

  • Turn off the printer and ensure that the printer power cord is connected directly to an electrical outlet.
  • Now, as suggested close all of the running programs of the PC device to shut it down.
  • Switch on the printer device as well as the computer.
  • Try to scan now and check if it works or not.

Solution 2: If the above fix did not work out then, have a check on the USB connection

  • Try to reconnect the USB cable directly to a different port of the computer. If problem persists then, unplug all of the devices from other USB ports as well. This solutions will also HP Printer USB scanner connection error easily

Solution 3: This is the third solution where users should run the “Print and Scan Doctor”

Open the computer desktop and double-click on “HP Print and Scan Doctor” icon to get access to a particular tool. Follow steps below to go ahead with this process:

  • Click “Start” which will automatically appear on the Welcome screen.
  • Select the type of printer and tap “Next” icon.
  • Tap on “fix scanning” button.
  • Go to the “HP Print and Scan Doctor result screen” to view the list of actionable results displayed on the screen.
  • Evaluate these results now.

Solution 4: Uninstall the printer software if all of the above solution did not resolve this issue

  • Here uninstall the printer software before reinstalling the latest printer driver.
  • If the printer is connected to the computer via a USB cable then, disconnect the printer cable
  • Search for “Windows for programs and features” option and click on “Programs and Features” icon which is given in the list of results.
  • Click on “HP printer name” and tap “Uninstall or Yes” icon
  • Follow all the given on-screen instructions to complete all your software removal process
  • Restart the computer as suggested by HP Printer Customer Care technical team.

Why customers are choosing our tech support solutions? Here are top reasons:

  • We think ahead
  • Technicians are backed thorough knowledge
  • 24/7*365 days assistance as and when needed
  • Customers’ feedback are always taken as a priority to improve our service
  • True results
  • We do understand the needs of our customers
  • Highly focused in our work
Related Blog: How To Fix HP USB Error 43?

Get connected with our team to fix HP printer issue with optimized remediesHP-Customer-Support-Phone-Number

We are available 24/7 hours to assist customers in resolving issues from the core while ensuring that these remedies are future effective to apply. HP Printer Customer Support Number +1-800-297-9982  technical team is sound and competent in dealing with all types of technical faults that occur in the device. Feel free to connect us for hassle free remedies delivered right at your desk.


How To Fix HP Cartridges Locked To Another Printer Error?

If the HP printer is giving this message then, it signifies that something is wrong with its cartridge protection. It sounds as if like the issue is directly connected to printer firmware. So, fix HP cartridges locked to another printer error with suitable guidelines at HP Printer Customer Support Number +1-800-297-9982. However one will be displayed with a message as “Used or counterfeit ink cartridge detected “. We do understand users’ frustration about this error message but below are guidelines instructed to get rid of the problem in easy ways. 

Fix HP Cartridges Locked To Another Printer Error

Steps to fix HP cartridges locked to another printer error

Before applying the actual solution, the very first thing is to remove, disable or bypass the cartridge protection setting on the HP printer. These are needed to use either for printer control settings or for printers’ IP address for printers that are well connected to the internet.

Step 1: For non-internet connected printers:

Here as advised by HP Printer Support team, the device as well as the printer section should be found in the control panel and select the HP printer. Find the cartridge protection tab in the HP toolbox and then, click on “disable cartridge protection” icon. Save all of the changes now.

Step 2: For internet connected printers:

Go to the printer section and in the settings menu search for suitable printers’ IP address. A point to be noted that users are needed to type into a browser search bar to help navigate to the printer configuration page. Click on “settings” icon and then tap on “disable cartridge protection” option.

Reasons that compel customers to approach our solutions:

  • We make our best efforts to resolve each and every issue
  • 24/7 hours tech support engineers are available to assist customers
  • Expert, competent and skilled technicians
  • We do understand the needs of our customers
  • Customer’s feedback is always welcome
  • Highly focused in our work 

Connect to HP Printer expert technicians for world-class solutions to related issueHP-Printer-Support-Phone-Number-2-3

We are backed by skilled and competent experts who are working at HP Printer Customer Service Number +1-800-297-9982  ready to assist customers by all means. Technicians are available 24/7 hours to help delivered the most suitable choice for various HP Printer technical problems. Call us anytime and get your problems resolved.

HP Printer Error Code 409

How to Fix HP Printer Error Code 409?

Depending on your HP Printer, a fax error code might display on the printer control panel or on a fax history report anytime and you will need to instant Fix HP Printer Error Code 409. Get the most reliable solutions to get rid the problem by approaching us at dialing HP Support Number.

Therefore, this error is related to fax error, or remote side and printer. It generally occurs during a V.34 transmission, the local machine is unable to connect (handshake) with the remote machine and is therefore unable to send a T30 frame. This happens when the line is disconnected or if line conditions degrade during the session. Then you don’t need to worry about it, as this issue is faced by many users and easily solve it. Then, follow the below-defined steps to fix this fax error in an instant way.

Fix HP Printer Error Code 409

Steps to Fix HP Printer Error Code 409:-

Step 1:- Remove the Phone Line

First of all, you should remove any pass-through devices from the phone line, and then try the fax again.

Step 2:- Confirm that the Fax/Phone Cable

After then you have to confirm that the fax/phone cable that is no longer than necessary and that it doesn’t pass near unprotected electric motors such as heaters, fans, or household appliances.

Step 3:-Send the Fax Again

Then you need to try to send the fax when telephone line conditions have enhanced.

You will notice that after send and attempt to obtain the fax again when telephone-line conditions have improved.

I hope, this process resolved the issue, and you can continue with your HP printer.

In case, if the issue persists, then connect experts to get quick support.

Related Blog: How to Fix HP Printer Error Code 49.4c02?

Call HP Printer Customer Support Number for Prompt Help


Connect with Professionals anytime to get immediate Help for fix HP printer problems. We are independent third party tech support and offering impeccable support to solve out HP printer troublesome situations. Our team of well-experienced and certified technicians is available round the clock at single call at HP Printer Support Number +1-800-297-9982  to give on the spot solutions to fix the HP printer related technical problems. Hence, call us now to get more help & information to printer HP inquiries.


How to Fix HP Desktop Error Code 0xE0EF0003?

The issue generally arises when users are installing the system and they have come across this issue. So, fix HP desktop Error Code 0xE0EF0003 before you face future technical faults. Also, one can approach our technical team at HP Desktop Customer Support Number +1-800-297-9982 for apt guidelines. While this issue occurs, users will come across corrupted image in HP recovery partition, damaged DVDs as well as corrupted image displayed over the HP Quick Restore kit, failed memory modules are experienced, etc. are found to exist. But let us give you more introductions about it. Users when trying to restore their operating system with the help of HP recovery partition image will face unexpected faults. Apply below steps to overcome the issue in easy ways.

Fix HP Desktop Error Code 0xE0EF0003

Steps to fix HP desktop Error code 0xE0EF0003

Step 1: If users are somehow trying to restore with the help of HP recovery partition then, the recovery image is found to be in complete corrupt mode. So it is suggested by HP Desktop Support team to work with HP Quick Restore CD’s.

Step 2: However if working with HP Quick Restore CD’s ensures that the DVDs are used with clean device and is found to be in damaged state then, if possible try with work with QRCD kit.

Step 3: If still the problem continues HP Error code 0xE0EF0003 to happen further then, troubleshoot all possible memory failure test options with another memory module in various memory sockets. 

Reasons that make customers approach our solutions are:

  • Award winning tech support solutions
  • Small enough to care but large enough to manage every technical fault
  • Trusted advice with future effective solutions
  • We add value to your solutions not complications
  • Expert team is always ready to assist you in every possible manner
  • We are well known and reputed for our unique solutions
  • Customers’ burden are taken away from them by following seamless transition
  • Highly updated solutions are delivered
  • 24/7*365 days service

Related Post :7 Important Tips to Improve HP Desktop Performance


Contact our HP Computer Support Number +1-800-297-9982 with world –class support solutions delivered right at your desk. Our expert team is available 24/7 to assist customers with proactive solutions for all related cause arising within the device. So, call us anytime and get the most suitable choice solutions for any particular problem. Feel free to connect with our team and get hassle free remedies right at your desk. Solutions are delivered within defined timeline.

Fix HP Business Inkjet 3000 Series Error Code

How To Fix HP Business Inkjet 3000 Series Error Code?

HP business inkjet printers sometimes come across unexpected error known as 49.237E which executes in the LCD. The issue is due to malfunctioning of peripheral device like memory DIMM, HP Jetdirect card and disk drive card. Fix HP Business Inkjet 3000 Series Printer Error Code at HP Printer Customer Support Number +1-800-297-9982. Further if we study more then, users are supposed to determine which all peripheral devices are causing this error to execute. However, turning off the printer as well as removing all of their peripheral devices is recommended. Reinstall any of the devices, turn on the power, and checking whether the error occurs or not should be performed. But below we have instructions to explain users how to overcome the problem in an easy way.

Fix HP Business Inkjet 3000 Series Error Code

Steps to fix HP business Inkjet 3000 Series Error Code are as follows:

Step 1: Turn off your printer as suggested by HP Printer Customer Service team.

Step 2: Remove all of HP Jetdirect devices and then, remove extra memory if you have installed somewhere and on any other device within the printer namely disk drive card.

Step 3: The next thing is to turn on the printer. If this error persists then, the printer certainly needs a repair service. If the error does not persists then, follow below guidelines to isolate the cause of the code:

  • Turn off your printer device and then, install all extra memory if needed one DIMM module at a time.
  • Switch on the printer after each DIMM module has been installed to check whether one of the DIMM modules is the cause of the error. If the DIMM modules are not the culprit then, continue with below given steps:
  1. Turn off your printer device and install your HP Jetdirect device.
  2. Switch on the printer just after the HP Jetdirect device has been installed to check whether this problem executes or not. If however your HP Jetdirect device is not the culprit then again apply below steps:
  3. Turn off the power button
  4. Continue to install all of the remaining devices that were earlier removed, one at a time, to check whether the issue still persists to happen. Ensure to turn off the power and install a device. Turn on the power to check whether the error occurs or not? If your issue occurs after installation of the device then, the device is likely the cause.

Related Post : How to Fix HP Printer Error 0x80073b01?

Top reasons to choose our solutions:

  • Dedicated, expert and competent tech support engineers
  • 24*7/365 days assistance delivered to users
  • Industry-matched tech support solutions
  • Customers’ feedback is always welcome
  • Trusted technicians
  • Instant remedies delivered at your doorstep


Get Connected to HP Printer Support Experts for proactive remedies delivered to you!

Customers are always encouraged reach out to us at HP Printer Customer Service for outstanding solutions delivered on immediate request. Backed by skilled and thorough technical experts, we have always delivered customer’s suitable solutions while ensuring that they are future effective. Feel free to contact us anytime and experience our hassle free solutions.

HP Error Code 0xc0000225

How To Fix HP Stream Notebook Error Code 0xc0000225?

To begin with, error code 0xc0000225 means Windows is unable to find the System Files which is used for booting, it is also known as BCD (Boot Configuration Data). This means if your system files are corrupted or the disk file system comprises of a bad configuration, the 0xc0000225 error is evident. In addition to these, you can also face this error when the required system is unable to communicate or is inaccessible. In addition, if the surface of the disc is not clean or system restoration is not functioning, this error code can pop up. It is the HP notebook error which is disrupting the laptop functioning and can be pretty frustrating for the user.

This is the common issue faced by users while working on Windows systems in HP devices. The error arises due to faults in the boot configuration of BCD data files which is either missing or even corrupted. Fix HP Error Code 0xc0000225 by approaching for expert help at HP Customer Support Number +1-800-297-9982. However, users may come across this error code due to disk write issues, power problems, boot sector virus problems or even errors are generated at the time of configuring of the BCD on manual mode. As we said that this issue is probably due to critical update in Windows system, so it really needs to be fixed on immediate request.

Possible Reasons For HP Stream Notebook Error Code Code 0xc0000225

With the HP NoteBook, you can face the following error because of the below-listed reasons:

  • The Hp notebook BIOS is unable to detect the hard drive.
  • The external hard drives can be physically damaged.
  • The Windows Master Boot Record (MBR) is located on the hard drive which is corrupted.
  • The folder of the hard drive where the MBR is located is no longer in the active mode.
  • Faulty installation of the operating system.

These were some of the common reasons for which the user can face the HP error 0xc0000225. Let us now check out the solutions to resolve this error as soon as possible.

Fix HP Stream Notebook Error Code 0xc0000225

Steps to Fix HP Stream Notebook Error Code 0xc0000225 are as follows:

 Users will be introduced with various for removing the error code explained by HP Customer Service team are as follows:

Method 1: Repair your computer device if possible

  • Insert Windows installation disc and then, restart the device.
  • Choose the suitable language settings and click “Next” to proceed ahead
  • Click on repair icon to repair your computer

Method 2: The second method deal with the installation of Windows 10

Make an attempt to install Windows 10 with the help of media creation tool by following below outlined steps:

  • Users are advised to perform an “Automatic Repair” process. When you computer restarts, wait for the manufacturer logo to appear and check whether there is an option for boot menu or not? To do this press “F12” key
  • The boot menu key may somehow differ with each manufacturer and however if you are unable to find the boot menu key, connect with your user manual.
  • Restart your computer device when the manufacturer’s logo is being displayed. Keep pressing the “Boot” option and enter into it. You can, however, change boot option to CD\DVD ROM.
  • After done with the boot process by using Windows 8 DVD, a black screen will automatically get visible with gray text. Here, press your choice key to boot from CD or DVD.
  • Make a selection of accurate time as well as keyboard type.
  • Click to choose “Repair your computer” icon which is located in the lower left corner of the screen.
  • Tap on “troubleshooting” icon or an advanced option. Click on “Automatic repair” icon.


You Can Use This Method also to Quick Fixes For HP users

There are various steps you can try to recover your system from this error. To recover the corrupt files, you can either choose automatic repair or go for a disk check. Here is the list of some suggested solutions that you can employ to fix the 0xc0000225 error code:

  • Try to run Automatic Repair: The automatic repair tools flash while you are trying to boot the laptop. To do this, follow the steps:
  • Switch off your system.
  • Insert the external hard devices such as USB cable or flash in your system.
  • Restart the HP laptop.
  • Tap on any function key and choose the preferred language.
  • Click on the option ‘Repair your computer’ and choose the ‘Troubleshoot’ option.
  • After this, select the Advanced option.
  • Select ‘Automatic Repair’ and let the process complete.
  • Restart your laptop after total completion of the processes.
  • Choose Command prompt for solving this issue: The command prompt option is beneficial in solving error codes easily. After you run the installation disk, choose the desired language and restart your system. After this, choose Command prompt following the advanced option.
  • Rebuild the Boot Configuration data: Follow the same instructions from the above mentioned until the step where you need to click command prompt. After that you can enter these following commands:
  • Choose the command ‘bootrec/ scanos’
  • Press ‘bootrec/ fixmbr’
  • bootrec/ fixboot
  • bootrec/ rebuildbcd
  • Disable Early Launch and Faulty Malware Protection: At times, the anti-malware can trigger such error codes. Disable the early launching of malware protection to avoid the HP Stream Notebook error.

If you are finding it difficult to solve the error code yourself, please resort for technical help. It is evident that technical devices will incur errors, but if you cannot solve it after applying the method once, do not complicate the issue with more trials.  You might end up increasing the damage and invite unnecessary expenditure.

Related Post:- How to Fix HP Laptop Error Code 651?

Why should one choose us?

  • 24/7 hours tech support service
  • Experienced professionals
  • Instant remedies delivered at your doorstep
  • Customer’s feedback is always welcome
  • Industry matched solutions
  • Rusted technicians


Contact at Our HP Customer Care Service team for instant solutions delivered at your desk!

We are available for users 24/7 at HP Customer Support Service to assist users in fixing up complex level issues arising within the HP device. Technicians are backed by skilled and thorough knowledge about every smallest to smallest issue and thus fixing them from the core. Feel free to connect with us any time for hassle-free solutions delivered within a defined timeline.

We comprise a team of technical experts for HP who are good at fixing all error codes. Our team understand the importance of flawless notebook usage and hence are working to serve you with better results every time. Connect with us by dialing our helpline number. Along with this, you can also utilize the Live Chat option if you find our phone lines busy. Chat with our experts and get handy solutions online. You can also mail us by describing your issue and our tech professionals will address your issue within 24 hours. Feel free to connect with us and resolve all your HP system issues instantly. We will help you resolve the HP Stream Notebook Error Code 0xc0000225 within a short span of time.


Windows Error 0x80248007 In HP Device

How To Fix Windows Error 0x80248007 In HP Device?

Users will generally come across this error when they are trying to update their Windows 10 in HP devices.  As most of the users come under the grip of this problem, it is advised well in advance to fix Windows error 0x80248007  in HP device with an expert guideline delivered at HP Customer Support Number 1-800-297-9982. Users absolutely are asked not to worry about this common technical fault as there exists multiple fixes to get rid of the issue faster. 

Fix Windows Error 0x80248007 In HP Device

Steps to fix Windows error 0x80248007 in HP devices are as follows:

We currently have three most convincing fixes to overcome the issue easily namely “Windows update fix”, “restarting Windows Installer service” and “update device drivers”. However we will discuss only one of them name that are most suitable to apply as suggested by HP Customer Service team. 

Method 1:  Apply Windows Update service to fix the problem faster

This problem is usually related to ill-functioned Windows Update services which further causes 0x80248007 to execute.  Follow guidelines below to fix it:

Step 1: Reset your Windows Update Service

  • Access the keyboard and press “Windows logo” key. Click on “Control Panel” and move on to the next step
  • Secondly, users are advised to tap on “View by Large icons” option and click the “Administrative Tools”.
  • Now, double-click on “Services” icon now.
  • Right-click the “Windows Update” option and click the “Stop” icon.

Step 2: Deletion of all temporary update files

  • This is step where one needs to delete all “SoftwareDistribution folder. To do this, perform below instructions:
  • Go to the “C:\Windows\SoftwareDistribution” section and double-click on “DataStore” folder to get access to it. Users are advised to delete all of the files as well as folders included in it.
  • The next thing is to go back to “SoftwareDistribution” folder and double-click on “Download folder” icon to work with it. Delete all of the system files that are there in this folder.
  • Restart your Windows Update service now
  • Open your Windows Update service again which is found in the “Control Panel”. Go to the “Administrative Tools” section and click on “Services” option. Tap on “Windows Update” icon
  • At last, simply right-click on your “Windows Update” icon and tap “Start”.
Related Blog: How To Fix HP Error 651 in Windows 7/8 and 10?

Connect with our HP technical experts for world-class solutions to be delivered at your desk!


Get connected to HP Customer Service Number +1-800-297-9982 for immediate solutions related to HP queries arising within it. We are backed by highly skilled and competent technical experts who hold in-depth knowledge about every smallest to smallest issue with world-class support solutions. Feel free to connect with our team anytime with hassle free solutions.


How to Fix HP Printer Error 0x80073b01?

This is Window Defender error that executes in HP devices when the software stops protecting users from dangerous malware attacks as well as viruses. So, in order to avoid any serious issue within the device, it is advised to Fix HP Printer Error 0x80073b01 by impending at HP Customer Support Number 1-800-297-9982. The software is basically used to remove viruses from the operating systems in HP computers. However, when users are working with the Window defender an error message will somehow occur on the screen. This should be fixed immediately.

Fix HP Printer Error 0x80073b01 

Steps to fix HP Printer Error 0x80073b01

Step 1: The first and the foremost step is to suspend all your unwanted applications that are running in the Windows Task Manager. To do this, just open up the “Task Manager” and then, simply press the “CTRL+ALT+DEL” icon.

Step 2: User are recommended by HP Customer Service team to undo all hidden folders as well as files. What one needs to do is simply to click the “Start Menu” and then, open up the “Control Panel” section. Go ahead to search for “Folder” option.

Step 3: In the third step, navigate to the “folder option” by tapping on view tab as well as uncheck the “hide protected operating system files” option. Now, mark a checkbox with the tick mark to make all of your hidden files and folders visible. Tap “OK” icon again and continue further.

Step 4: Check for any damaged installation issues related security software installed by users. To get rid of this problem, follow below guidelines namely:

The first thing is to click on “Win+R” keys together to run the dialog box. Also, type the “regedit” icon and press “OK” button to open up your “Registry editor”.

Step 5: Delete all of the Connected Files by typing below commands:

  • C:\Program Files\<random>
  • C:\Window\Temp\<random>.exe
  • %AppData%\<random>.exe
  • %CommonAppData%\<random>.exe
  • %temp%\<random>.exe

Step 6: Delete all of the records, history section as well as internet cookies. To do this, perform below steps:

  • Open up the internet explorer and then, navigate to the “tools” section. Now, simply click on the internet option to choose the “advanced” icon, visible in the internet options dialog box. Click the “reset” button and then, check for “delete personal settings” icon and choose “reset” button.
Related Blog: How To Fix HP Error Code 0x805d0700?

For handling more such issues, call at HP Customer Care Service team for prompt remedies


Get in touch with technical team at HP Customer Support Number +1-800-297-9982 for world-class solutions to HP technical issues at your desk. We are backed by top-notch technicians who hold deep know-how about every smallest to smallest issue and resolve them from the core. Solutions are matched as per the latest industry trends while ensuring that they are future effective too. So, feel free to connect with us anytime and get the most suitable remedies for every issue occurring within the device.

HP Error 501

How To Fix HP BIOS Error 501?

This is basically an HP BIOS start up error where your BIOS won’t be found at all. This is because either it is corrupted or is missing. So, Fix HP BIOS Error 501 by approaching for a professional help at HP Customer Support Number +1-800-297-9982. Further if we see then, the issue further results from working with INFO button launch HP EFI Application. However, if the operating system cannot find the EFI partition then, also issue results in such unexpected faults. Below are steps discussed to get rid of the issue in easy ways.

Fix HP BIOS Error Code 501

Steps to Fix HP BIOS Error 501 or Bios Application Error (501)

Solution 1: Try our first solution to fix the problem in easy ways

Step 1: The very first thing is to enter the “BIOS” mode by just pressing F10 button while users are in the middle of booting up

Step 2: Users are advised by HP Customer Service team to navigate to the “System Configuration” as well as on the “Device Configurations” section.

Step 3: The next thing is to search for the option known as HP Quicklook or HP Quicklook 2. The next thing is simply set it to “Disabled” option

Step 4: At last, just save all of the modification made by you and then, exit carefully

Solution 2: If the first solution did not seems to be working out then, try this out

Step 1: Here, users first need to insert their Windows installation disc and restart the computer
Step 2: Secondly, users are advised to click on their choice language settings and tap the “Next” icon
Step 3: Click and repair the computer now

Solution 3: The last solutions is all about working with “SAFE MODE”

  • Choose the Safe mode to fix the error code faster:
  • Safe mode with the networking as well as with the command prompt
  • Also, one can choose to work with the last known good configuration process which will be in advanced form
  • Start your Windows system in normal mode now
Related Blog:How To Fix HP Error 00729C98?

For more issues, dial HP Technical Support professionals for world-class solutions!


Connect us at HP Customer Service Number +1-800-297-9982 to HP Bios application error 501 and get instant solution delivered at your desk related to HP devices. We are available for customers 24/7 to assist them with all possible solutions while ensuring that they are future effective to have. Technicians are skilled and competent about every complex to complex level problems which helps them resolve problems from the core. So, call us anytime and get your HP issues resolved completely without any delay.