Category Archives: HP Battery Alert


How to Fix HP Battery Alert Error Code 601 Disable

The aforementioned error code is a symbol of HP device battery issue which occurs when the battery power is too low. So, to Fix HP Battery Alert Error Code 601, it is sometimes needed to approach for a professional help which can also be availed at HP Customer Support Number. Before moving to solutions, let us discuss about the issue more. The battery storage capacity is an amount of energy the battery will store to power a portable device like notebook computer. However, lower the storage capacity of a battery, the shorter time it will power any portable device. Thus in this case, all of the rechargeable batteries will eventually lose its storage capacity. This loss is known as aging process which is irreversible and cannot be restored further. So, higher storage capacity of a battery basically varies from devices to devices after one year of use

Fix HP Battery Alert Error Code 601 Disable

Here are Steps to Fix HP Battery Alert Error Code 601 Disable

Work as per below instructions as suggested by HP Online Support technical team to get rid of the issue in easy way:

Method 1: Try This Solution First

  • Press and then, hold the power button for at least five seconds to switch off the computer device.
  • Turn on the computer and press the F2 key on repeated basis and it should be followed only once in every second till the HP PC Hardware Diagnostics UEFI menu is displayed automatically.
  • Click the “Component Tests” which is found in the main menu
  • Now, in the list of “Component Tests” section, click to choose the “Power’ button.
  • Navigate to the list of “Power Tests” and then, click the “Battery” icon
  • In the Battery Test, just click on “Run once” icon to begin with your Replace the CMOS Battery Test process. It will take almost about two minutes. If needed, users may take up-to 2 to 4 hours. Now, cancel it any time by pressing the “Escape key (Esc)”.
  • Once the testing is done, the first line on the Battery Check page will be displayed which will show the status battery condition. If it has passed the test then, click on “Main Menu’ or just click the “Battery Details” for more data.
  • If the process has failed then, check the below table suggestion. Now, write down the battery status as well as the Failure ID.
Related Blog: How To Fix HP Error 651 in Windows 7/8 and 10 ?

Method 2: This Method is Based on Manually Mode.

To do this, perform below steps as instructed

Step 1: Charge the battery first

Step 2: The next step is to discharge the battery

Step 3: Users are now advised to recharge the battery to 100%

Step 4: At last, just run the battery test process.

HP Customer Care Service

Connect us at HP Customer Support Number for World-Class Solution

Get in touch at HP Customer Care Service to help us resolve you issues with the most appropriate choice of solution at your desk. We are available 24*7 hours to assist users in fixing up unexpected error in HP CMOS Battery in the HP Pavilion issues anytime anywhere. Feel free to connect us anytime and get hassle free solutions as and when requested.

HP Battery Alert

How to Resolve HP Battery Alert Issue?

HP Battery Alert Issue appears before windows starts. It’s happen because HP utilities perform system validation in different phases such as examine to primary battery capacity and also checked for any other secondary installed battery. If your computer does not pass these tests then it shows boot up error code 601 for primary (internal) battery.

HP Battery storage capacity is the total amount of energy that a battery holds the capability to store to easily power a portable device such as a notebook computer. The lower the storage capacity of a battery, the shorter the amount of time it can easily power a portable device.

All the rechargeable batteries, according to HP Computer Support team of professionals, have gradually lost their storage capacity to store. This kind of loss in the storage capacity is known as irreversible and cannot be restored at all. The maximum storage capacity of any new battery can be quite different from the maximum storage capacity of a battery after one year of use. So, it is always advised.

Steps to Fix HP Battery Alert Issue

Step 1: Perform a Battery Test

  • To resolve a Battery Alert message, it is advised by HP tech support experts to perform a Battery Test in the System Diagnostics (F2) environment, by enabling the battery for the best usage performance.
  • To access the HP System Diagnostics Battery Test, a user simply needs to turn on the computer and then immediately press the esc key button to display the Startup Menu easily.
  • Further one needs to press the System Diagnostics F2 key, and then carefully select the “Battery Test” option

Step 2: Hold Button

  • Users are asked to simply hold the power button for at least five seconds in a day to easily turn off the computer.

Step 3: Working with the “F2” Key

  • Turn on the computer first and then instantly press the F2 button for at-least once in every second until you find that the HP PC Hardware Diagnostics UEFI menu has been displayed in the screen.

Step 4: Component Test Feature

  • Click on the “Component Tests” just located right to the main menu.
  • Next, in the list of “Component Tests” section, you simply need to click on the “Power” button. Next, in the list of Power Tests section, just tap on the “Battery” option.
  • On the “Battery Test” section, simply click on the “Run once” section. The Battery Test will then begin to work

Step 5: After Completion of Testing Procedure

  • When the testing is completed, then first line on the Battery Check page will clearly displays the status of the battery. If the user’s battery has passed, then click on the “Main Menu” or simply click on the “Battery Details” for more knowledge.


Fix all your HP battery related issues with our expert professionals working at HP customer support department right away! Our services are exceptionally reasonable to afford and is designed to match all the user’s expectations.