Category Archives: HP OfficeJet Printer Errors

HP Officejet 4620 Turn Power Off Error

How To Fix HP Officejet 4620 Turn Power Off Error?

Hewlett Packard also has known widely as HP, has made a massive turn over in the market with the launch of its printer. HP printers stand best because of its facility of providing ultra-violet hybrid devices. Such a printer avails the provisions of reliability and versatility at the same time. But it is a common fact that not only the worst but even the best of the electronic gadgets incurs some of its bugs. One such shortcoming of the HP printers can be detected at once by the arrival of the HP Officejet 4620 Turn Power Off Error.

You can avail of a range of solutions that are readily present there on the internet. But there is no assurance that you will be able to be done with the issue. Therefore, instead of beating around the bush, you can have a look at our valid suggestions.

We are user-friendly to go through each of the below-mentioned steps actively. Therefore, there will be hardly an issue for you to settle down the technical difficulty on your own.

Users will face this issue in their HP Officejet 4620 e-All-in-One Printer when they are turning the printer off. Users need not get worried about it as we are a team technical experts available to fix HP Officejet 4620 turn power off error in an easy manner. Let us see what steps are below to help you resolve the error message.

What Is HP Officejet 4620 Error?

The HP Officejet 4620 error is an alert code that notifies you about the abnormal functioning of your printer. The device generally pops up with the message telling you to disconnect and reconnect the device. The control panel of the printer displays the error code 4620.

The hassle that you may go through while dealing with this error is the disconnectivity between the printing device and the computer. Usually, the data cables which links your printer to your computer can be faulty.

Well, it was all about the necessary details that you should know before dealing with the procedure of treating the HP Officejet 4620 Turn Power Off Error.

Fix HP Officejet 4620 Turn Power Off Error 

Steps to fix HP Officejet 4620 turn power off error are

Step 1: Disconnect if you are working with any fax or USB cable to the unit. Turn on the printer device. This you need to do in case checking whether the device is switched on or not?

2: With your printer turned on, users need to disconnect the power cord from the rear section of the printer device.

3: To HP OfficeJet 4620 turn power off error, just unplug the power cord from your wall outlet and wait for at-least 60 seconds.

4: Now, carefully plug in the power cord into the wall outlet but keep in mind that HP will always ask users to connect the printer power cord with its wall outlet.

5: Try to reconnect your power cord to the rear of your printer device.

6: As per as HP Printer support service technical tea, if the device does not automatically turn on then, it may go into its warm-up period.
7: Wait till you see that the warm-up period finishes and your printer will be in the idle state. This is before users will proceed with the next step.

So, these were the steps above to help you fix the problem in an easy manner. Still, if find it difficult to deal with this error message then, approach us anytime at below mentioned details.

You Can Try This Effectual method To Treat If above method is not Working | HP Officejet 4620 Turn Power Off Error:

To pursue all the relevant processes to overcome the HP Officejet 4620 Turn Power Off Error, check below.

Method 1:

Switch off the printer and then turn it back on again. Next, detach all the wires from the printer. Not only that, remove the other devices that are in connection with the printer.

Disconnect all the ethernet or any parallel wires or even any USB cables from the back of the product.

You must note the fact that you should not detach the power cord while you are following this method.

Separate the memory card or any other driver of the USB devices that were present in the machine. Now, hold the power button to switch off the printer for 15 seconds. Then, verify the error code display. If the code does not display, be rest assured that your issue is solved. But If not, kindly move on to the next solution of HP Officejet 4620 error.

Method 2:

Carry out a clear reset of the HP product.

Just hold on to the power button of the printer to turn it on. While it turns on, then detach the power cord from the rear of the device. You will need to unplug the same from the wall socket as well.

You have to give it a rest for about 15 seconds before you put the cord back to the wall outlet. Now, attach the power cord behind the HP product accordingly. Verify whether the printer is turning on or not. If not, then press the power hook to switch the printer ON.

Method 3:

Execute the reconnection of the data lines and the devices.

Just like the above two steps, you will have to initialize the process by turning off the printer. Then re-attach one USB or parallel cord or the ethernet to the back of the printer.

Turn the product on now. Ensure whether the control panel of the printer is displaying 4620 error code or not.

Method 4:

Do a proper replacement of the power module or the cord of the power supply. Sometimes due to the short-circuit faults of the power module, connections fail to establish. As a result, errors are often cited.

Before the module replacement, you need to ensure the fault in the power module. Check if the module is having a permanent link up with the power cord or not. The power module that you are using for the printer must have the same part number as per the user guide.

Hence, these are some of the alternative procedures following which you may come up to an ultimate recovery of your HP product.

Related Blog: How To Fix HP Printer Error 0x61011bed?

For more issues, connect with our expert team and experience world-class solutions at your desk!


Call our HP technicians who are working at HP Printer support number +1-800-297-9982 24/7 hours to bring future effective solutions at your desk. Technicians study every minute to minute issue from the core and this always helps users to deliver adept remedies at your desk. Place calls to us anytime and experiences prompt solutions at your desk.

If the same issue is constantly popping up on the control panel of the printer, thereby, bothering you up simply approach us. Ring us directly via our toll-free number and avail of a direct conversation with our tech support experts. You may also email us at our HP Customer Care Email ID to inform us of your problem. We have also got the live chat support for your convenience. We look forward to helping you out.


HP OfficeJet Printer Error Code 0x07a74dd6

How To Fix HP OfficeJet Printer Error Code 0x07a74dd6?

The above error is when users are trying to print documents and is connecting the printer to their computer. Fix HP OfficeJet Printer error code 0x07a74dd6 to apply our expert solutions available at our end.  There are various other reasons such as issues while users are trying to reset the device or in unable to reinstall the Print head or cartridges. Follow below steps to get over with the error code easily.

Fix HP OfficeJet Printer Error Code 0x07a74dd6

Methods to fix HP Printer error code 0x07a74dd6 are

Method 1: Power drain and remove the above error message

  • The first thing is to remove the printer’s cartridge
  • Switch on the printer device to disconnect the power cable. Unplug the power cord from the back side of the printer.
  • Try to remove the USB Cable, if still you find it in your device. Wait for at-least 2 to 3 minutes and press to hold the power button for 30 seconds. It will prevent users to pat an extra charge.
  • To fix HP OfficeJet Printer error code 0x07a74dd6, plug in the power cable without any extension cord. Plug the power cord again to the printer again.
  • At last, try to switch on the printer device and wait until you see the printer in idle state.
  • Have a check whether the above error is solved or not?

Method 2: Resetting of printer

  • This is another solution to help fix the above error code. Unplug your power button but ensure that the printer is switched on
  • Wait for at least 30 to 40 seconds and plug in the power cord again. Switch on the printer device and check whether you have applied all the steps.

Method 3: Cleaning the print head

Before you start applying this method, HP OfficeJet printer support technicians have suggested users to clean out the print head. Remove the print head and clean it out from inside out. Below we have steps to apply

  • Disconnect the power cable from your HP Printer and try to work with it
  • Now push up the print head mechanic to its center position
  • Switch on the printer device while ensuring that the device is on
  • When the print head starts moving and is navigating towards Left, close the printer cover.
  • Wait to boot it up completely 
Related Blog: How To Fix HP Printer Error 0x61011bed?

Connect with our tech support team and get world-class solutions!

HP-Printer-Support-NUmber-Banner-2-1024x282We are working at HP OfficeJet printer support number +1-800-297-9982 24/7 hours to bring users effective solutions at their desk. Our tech support team is study every issue from the core to deliver adept solutions as and when in need. Solutions are matched as per the market trends. On the other hand we do ensure that users’ expectations are met.

HP Printer Errors

How To Fix HP Printer Error 0x61011bed?

This particular issue is a result of the faulty cartridge when you were changing the printer’s cartridge. When this error occurs, users will be displayed with an error message. However, there are other reasons for this error that include block contact cartridge issues. The third reasons is due to “Out of Paper’ problem which appears on the computer and the device will stop responding further. Follow steps below to Fix HP Printer Error 0x61011bed.

 Fix HP Printer Error 0x61011bed

Here are Steps to Fix HP Printer Error 0x61011bed:- 

Step 1: Resetting the Device

  • Without switching off the device, just remove the power cord carefully from the back of the printer.
  • Wait at-least for 30 seconds and then, plug the power cord into printer device
  • However, if the device is not already switched on then, work with the “On” button to turn it on.

Step 2: Check for Any Kind of Paper issue and Reload it

  • Replace the effected paper to ensure that all of the paper is of same size as well as type. Because according to the HP Printer Support technicians, only one type of paper can easily be used in the product simultaneously.
  • Click the stack of the paper on a flat surface to easily align the edges.
  • Make sure that the stack of paper should have 10 papers but it should be below 25 sheets of paper.
    Insert the paper stack into the device and carefully push the paper guides against the paper.
  • However, one should ensure that paper is completely inserted into the product properly and can be picked up by the paper rollers easily.
  • Try printing again
Related Blog: How To Fix HP Printer Error Code 2753 ?

Step 3: Now, Adjust All of the Paper Settings in the Print Driver 

  • The paper settings in the print driver should be able to match the paper settings for at least one of the paper trays installed in the device.
  • Open and get access to a document in the program which should be used to print.
  • Click the “File” icon and then, choose the “print” option. Click on the “properties” option now. Users will be displayed a “The product Properties dialog box” on the screen
  • Click the ‘Paper/Quality” icon and then, choose the appropriate paper size from the “drop-down” menu list
  • Choose an appropriate type of paper from the drop-down menu.
  • Click OK button and again tap the “OK” icon to print the document.

Step 4: Clean the Rollers

  • Turn off the printer device and then, unplug the power cord.
  • Open the access door to work with the rollers.
  • Clean out all of the rubber rollers with a soft piece of cloth.
  • Do ensure that any of the paper rollers that are there on the input tray are completely cleaned. Clean up the rollers with a piece of soft cotton
  • Close the access door to plug in the power cord carefully.
  • Try to print now.
  • Step 5: Service the product
  • At last, service the printer device


Connect to HP Printer Customer Care Service Professionals for World-class Solutions

Our HP Printer Customer Care Service professionals are always happy to assist customers 24*7 hours while delivering them the world-class solutions. We are backed by skilled and competent technicians who resolves issues from the core. Feel free to connect us anytime and we are right there for you.

HP Error

How To Fix HP Printer Error Code OX83C0000A?

The error in HP devices is basically a NOS LOADER APP issue which indicates that there is a HP printer failure.  Users performing factory default settings can also receive this error as a “nos loader app” message.  While this error occurs, the printer will remain in unresponsive state because the code will continue to appear on screen. Well, we have solutions to Fix HP Printer Error Code OX83C0000A .


Solutions to hp envy 4500 error code 0x83c0000a nos_loader_app

Solution 1: Starting the printer

  • With you have turned on the printer device, they are requested to disconnect the power cord from the rear point of the printer.
  • The next thing is to unplug the power cord from the wall outlet itself.
  • Users are required to remove the USB cable if it is connected to the device.
  • Wait for a while like 2-3 minutes and press for some time to hold the power button of the HP printer. It should be done for approximately 30 seconds to easily remove any kind of additional charge.
  • Now plug in the power cable back to the wall outlet without any surge protector attached. Also there is an alternate option where you will come across extension cord. Now, simply plug back the power cord to the printer.
  • Turn on the printer and users are needed to wait till warm-up period finishes its process. Just have a check that the printer device is in idle state.
Related Blog: How to Fix HP Printer Error Code 49.4c02?

Solution 2: Try This Solutions if You are Not Satisfied with the Above one

This one is another solution explained by HP Tech Support professionals

  • While you have kept the printer in “ON” mode, users are advised to unplug the power cord from back of the printer and then from the Computer.
  • Now, power off the Wireless Router to go ahead with removing the error code.
  • Wait at-least for 60 seconds and then, plug in the power cord to the printer device only.
  • Check for any type error whether they are still existing in the printer
  • Now carefully power on the Wireless router.
  • Check whether the error still exists or not.


Connect at HP Printer Customer Support Number to get immediate replies for all your queries!

For any HP printer issue, connect to us at HP Customer Service Number to help us deliver you topmost solutions right at your desk. We are easily reachable 24 hours by customers to assist them in fixing up complex level issues at their desk. Solutions are unique to grab by users and this what makes us unique from other brands.

HP Printer Errors

How To Fix HP Officejet 4630 Printer Error OXB8668B28 Code?

The error code generally executes due to blinking issue in the HP Officejet 4630 Printer.  Users come across this problems when users are trying to print few documents and they find it as unresponsive. So, even if users have turned off the printer device and have reset it, it won’t solve the problem. Well, another thing which users mainly choose to go for to get rid of this issue is they try to reprint all their documents and still they find them unresponsive. Further they will comes across this error code with the ‘on/off’ button flashing repeatedly. Well, we have solutions below for you to Fix HP Officejet 4630 Printer Error OXB8668B28 Code that are effective to apply.


Solutions to Troubleshoot Fix HP Officejet 4630 Printer Error OXB8668B28 Code

Solution 1: Temporarily unplug the USB cable

  • Firstly, users are requested to perform a hard reset process to check whether it fixes up the problems or not?
  • Leave the printer on and then, unplug the power cable from your printer device as well as from the wall outlet for at-least 60 seconds.
  • The next thing is to reconnect the power cable into the printer and to the wall outlet. Be careful not to connect it to the surge protector. This is done to ensure that the printer is receiving full power supply Make sure the printer is well connected directly to a wall outlet to ensure that the printer is receiving full power.
  • Try another power outlet/room to eliminate any power connecting issues as well as surge protector problems.
  • Work with another power cable if needed
Related Blog: How To Fix HP Officejet 4630 Printer Error OXB8668B28 Code?

Solution 2: This solution Calls for a Semi-Full Reset Process

  • Check whether you have a flashing screen or not?
  • Change the settings which is an optional one
  • Now, restart the printer and update the printer firmware
  • Plug in the printer device directly into a power outlet and ensure that other devices are not at all interfering with your device.
  • Plug in the printer into a different electrical outlet carefully
  • Replace the power module and at last, service the printer

If you are still facing the problem then, we recommend you to get connected to our technicians at below mentioned details


Connect to Our Technical Team at HP Printer Support Number for immediate Response

Call us at HP Officejet Printer Support Number +1-800-297-9982 for immediate solutions to HP printer technical issues 24 hours by our technical team immediately. We are reachable for users as and when requested by them to have a call with us. Solutions are excellent to grab by them while ensuring that none of the credential files are damaged. Technical team is backed by thorough knowledge who are competent in solving complex of issues in just one response.

Troubleshoot HP OfficeJet 8702 Printer Paper Jam Error

How to Fix HP OfficeJet 8702 Printer Paper Jam Error?

When getting the print job done suddenly printer stops feeding pages. To fix HP OfficeJet 8702 Printer Paper Jam Error displayed messaged on printer control panel follow the steps. The message indicates paper might be jammed inside printer which need assistance from qualified technical experts.

HP OfficeJet printer are the fulfilling task completing photocopier machine. Belong to non-technical background connect with us for getting quality assistance for fixing the issues to have efficient working OfficeJet printer. Follow the blog steps to get rid of paper jam error occurred in user HP OfficeJet 8702, 8710 model.

Fix HP OfficeJet 8702 Printer Paper Jam Error

Steps to Troubleshoot HP OfficeJet 8702 Printer Paper Jam Error

Step 1: Clear the Jammed Paper from Variant Areas of Printer

Paper jam can occur in multiple area of printer machine. If user cannot locate the paper jam in one area continue to another until the jam has been cleared from all location. Area of paper jam include: input tray, ink cartridge access, rear printer, automatic document feeder.

Step 2: User Must Make Sure Carriage can Move Freely

  • Turn on the printer machine device
  • Open the cartridge access door with inserting the fingers into slot on left side.
  • Carriage move into ink cartridge access area
  • Until the carriage is idle and silent wait to continue
  • disconnect the power cord from rear of printer with printer turned on
  • Free the power cord from the main electrical outlet
  • Using the flashlight check for any object that might be restricting carriage
  • manually move the carriage by reaching inside printer through ink cartridge access door
  • Remove any loose paper found
  • Across the width of the printer carriage is freely moving
  • Close the ink carriage access door
  • Re-join the power cord to the rear of printer
  • Plug the power cord back to power source or electrical outlet
  • Try print by turning the printer ON

Related Blog: How To Fix HP Printer Printhead Error 0xc19a0020?

Step 3: Clean the Paper Feed Roller

Dust, paper, fiber and other might accumulate the paper feed roller and cause paper jam. Clear the rollers inside ink cartridge access area, inside rear of printer, ADF, and try getting quality print from device.

Step 4: Reset the Printer

Sometimes false paper jam persisting error message. Try Resetting the printer which might clear the false paper jam error

Step 5: Service the HP OfficeJet Printer

Service or replace the HP Product after completely preceding steps and not able to fix issues.

Our HP Customer Support Number is Always Ready to Answer Queries


When not able to fix the error or finding difficulty in resolving the HP OfficeJet error from reputed technicians. Connect to HP Customer Care Support Number towards positive side and wait no further. Our qualified tech experts are not just known for fast service but always offer full proof in comparison mode. Team of certified technical engineers present to resolve error by offering timely supporting services.

Troubleshoot HP Printer Printhead Error 0xc19a0020

How To Fix HP Printer Printhead Error 0xc19a0020?

The Print-head error 0xc19a0020 is a very common issue on HP OfficeJet Pro 6830. The error represents there is a Print-head alignment problem or the internal Printhead has electrically failed. Mainly this happens if refills or compatible cartridge has been in the printer. However, rarely this can happen if there is an error with the ink system itself. Therefore, those users having the same the problem, then they do not require taking tension anymore. They can easily Fix HP Printer Printhead Error 0xc19a0020.

Steps To Fix HP Printer Printhead Error 0xc19a0020


Step 1: – Check Paper

First, you should check there is not a paper sensing issue. However, depending on how much you have printed to date, there could be ‘ink mist’ interfering with the media sensor/sensing optics.

Step 2: – Check Cartridge’s Smart Chip

Try to remove ink cartridge and examine cartridge’s smart chip surface, meanwhile gold contacts also ensure for scratches or ink residue. Confirm cartridge’s smart chip position is correct if you find any suspected to physical damage, then replace cartridge ‘smart chip’.

Step 3: – Printer Diagnostics

You should try to clean your Printhead.
• First, lift printhead release latch (lever) to remove printhead assembly. Make sure the printhead cleaning procedures vary as per printer model.
• Then remove printhead and clean printhead contacts by using the damp cloth to wipe the electrical contacts from the bottom to the top.
• Repeat this step until no ink remains on the electrical contacts.
• Reinstall printhead assembly; lower the latch handle to securely lock the printhead assembly into place.
• Print a test pattern to determine if the problem has been fixed. If not, go to next step.

Step 4: – Try to Unplugging the Power Cord of Printer

• Unplug the power cord from the back of the printer, while the printer is ON,
• Then wait for some time, at least 1-2 minutes.
• Next, plug in the power cord to the printer. If the printer does not power on automatically, then press the “ON” button to do so.
If the HP Printer error code 0xc19a0020 displays again then go to the next step.

Step 5: – Install Ink Cartridges

Make sure the printer is turned on. If necessary, press the “Power” button to turn the printer on.
• Open the top cover of the printer.
• Press down on the old ink cartridge, and then slide it out of the carriage.
• Remove all ink cartridges from the printer.
• Then install the ink cartridges.
• Now, retest printer. If HP Printhead error 0xc19a0020 still exists, then it is time to get the experts help to fix it or replace.

Dial HP Printer Customer Support Number To Receive Immediate Assistance:-


Call at HP Printer Customer Support Number, to get immediate online help to fix this problem. This number will connect to the dedicated and experienced technicians, who are always ready to assist 24×7 days. The techies will give comprehensive help and proper instruction to troubleshoot the Hp problems. Hence, you can obtain online support by experts through various modes, Phone Support, Online Live Chat, Email, and Remote support.

Troubleshoot HP OfficeJet Printer Error 0xc19a0013

How To Fix HP OfficeJet Printer Error 0xc19a0013?

The HP OfficeJet Printer Error 0xc19a0013 is the problem of ink system failure issue while users are working with the printer. Not only this but, also there are other potential reasons to come across this error such improperly installed printer cartridges, damaged printer cartridge. Behind these cases, there is every possibility for ink cartridges to come in exhausted mode. Well, users can easily come over from these critical faults but, they need to follow strong instruction on how to troubleshoot HP printer error 0xc19a0013. Read our blog which describes solutions in overcoming this issue.

Solutions to Fix hp officejet pro 8610 printer failure

Here we will introduce you exactly two solutions to help solve the problem easily. Let’s see now:

Solution 1: Checking for ink issues of the HP Printer Cartridge

• Perform a thorough check for ink to know how much ink is left. To perform this step, navigate to the “menu” section and then, look for a message displayed as “obtain an estimated ink levels”
• Next, it is important to check that ink cartridges are not out of the printer for long time as their ink outlet can completely be dried out,
• If it is found that cartridge is filled up with ink but is not printing then it is always recommended to verify that whether the protective label has been perfectly removed or not. Because, this is the place where air enter the ink cartridge.
• The next step is to take into account to place cartridges accurately in their corresponding color. To solve the HP OfficeJet Printer Error 0xc19a0013, make sure that each cartridge color is not misplaced, and place the cartridge where the color is indicated. Do not continue if you are not able to perform this task properly.
• At last, print a test page to verify the cartridge quality.

Solution 2: Working with the Printer

• Turn on the printer on first by pressing the “on/off” button
• Once the printer is turned on, make sure to unplug the printer from the power supply first because it is clearly stated that unplugging printer while turned on is not unsafe to perform
• Wait for at-least 20 minutes to plug the printer feeder cable for getting the power supply
• Next turn on the printer manually or even you can do it manually
• If this still persists then, try to clean the printer heads.


Dial at HP printer Toll-Free Number for Instant Answers to HP Printer issues

I hope your issue related to HP printer error has been solved but still this error persists, call our HP Printer Customer Support professionals 0xc19a0013 hp printer error for instant solutions to this problem. We are reachable by users 24*7 hours to assist them in resolving their critical to critical issues as and when faced by them. Our services are comprehensive and are chosen the best from other brand. Your just one call will make our technicians reach to your queries instantly.


How to Fix HP OfficeJet Pro 8600 0xc19a0020 Printer Error?

HP provides a wide range of printers, compatible for both personal and professional usage. Officejet series is one the best innovations of HP. These devices are knowns for advanced features and user-friendliness. However, HP printers are electronic gadgets. Technical glitches are inevitable. Over time, you might encounter an HP OfficeJet Pro 8600 0xc19a0020 printer error. This issue will block you from printing. In case, you met with a 0xc19a0020 error, go through this article for the solutions as per your requirement.

HP OfficeJet Pro 8600 0xc19a0020 Error occurs printer ink issue, print head positioning problem or it may even happen due to the failure of the internal print head of the HP printer. This error will further display a message as “Problem with the print head”. But, there is a solution to this issue and our HP Office Jet Pro professionals have penned down promising steps to troubleshoot HP OfficeJet Pro 8600 0xc19a0020 error. All the below steps are well explained to enable users to understand the solution properly. 

Know About HP OfficeJet Pro 8600 0xc19a0020 Printer Error

A printhead is a component which is responsible for transferring the content to the printing medium. It holds and assembles the characters. Printhead issues are quite common with HP printers. When your printer fails to detect the printhead, it usually sends a 0xc19a0020 error message. Usually, this problem occurs after installing a new printhead.

Accordingly, this issue mainly indicates a printer Ink System failure. This error message can generate from an alignment problem with the printhead. An internal electricity failure can also result in this problem. Further, this error can occur from a misplaced smart chip on the refill ink cartridge.

In case, you are facing an HP OfficeJet Pro 8600 0xc19a0020 printer error, look for the reason at first. If you can’t figure out the problem on your own, talk to experts. Connect with our HP Customer Care team and resolve your queries.

Steps to Fix HP OfficeJet Pro 8600 0xc19a0020 Error

Step 1: Perform A Basic Check

  • Check for the availability of the HP OfficeJet Pro 8600 0xc19a0020 error and whether you can clear it or not.
  • Select the “PRINTER MAINTENANCE” icon next and then choose the ‘CLEAN PRINT HEAD” icon. Check for the print quality.
  • Make a selection of the “ALIGN PRINT HEAD” icon to adjust the print head properly.  If you are successful then, test with a different computer

Step 2: Check for The Print Head Function:

  • Make use of a plain paper for the purpose of testing to ensure that this is not a paper sensing issue. You should now know that depending on how much you have printed till date, there is quite possibly of ‘ink mist’ which is interfering with the media sensor/sensing optics.
  • Now, carefully remove the ink cartridge and then inspect cartridge’s smart chip surface to check for any scratches or ink residual available in the printer. To do this, you need to perform below steps now:
  1. Retest your printer by using plain paper or one can also use different paper type
  2. Next, replace the cartridge if you suspect that the device is physically damaged.
  3. If it is found that the smart chip position is in incorrect mode then, return ink cartridge to the appropriate re-filler for the purpose of evaluation.
  • Now perform a “PRINT HEAD Health Diagnostics Test” process, along with supporting service level/diagnostic tests.
  • To rule out all possible printer/cartridge connectivity technical problems, please make sure that you have followed all steps properly which will include PRINT HEAD removal process, thorough cleaning of the electrical PRINT HEAD surface and on the CARRIAGE ASSEMBLY.
  • Remove all of the 4 ink cartridges and then, remove the internal PRINT HEAD device. Now gently clean rear electrical contact parts of the printer and carriage electrical contacts.
  • After all the above steps performed, users may need to perform a hot water flush process on the PRINTHEAD

Alternate Method to Troubleshooting Tricks For 0xc19a0020 Printer Error

When you encounter any issue with the printhead, you won’t be able to print for the time being. Since we rely on printers for important work, it can be problematic. Try to find out the reason behind the error. There are a few methods you can avail to eliminate the problem.

Use Genuine HP cartridge To Avoid The Issue

When you use ink cartridges which are not compatible, it results in error messages. So, open the cartridge access door and check whether you are using are original HP product. To enjoy uninterrupted printing, always use genuine cartridge.

Resolve The Error By Resetting The Printer

Resetting printing mechanism can be of help. Follow the steps to complete the procedure.

Step 1: Turn on your printer and wait till it is silent.

Step 2: Now, from the rear of your printer disconnect the power cord. Also, unplug it from the wall outlet and wait for a minute.

Step 3: After 60 seconds, reconnect the cord to the wall outlet along with the rear of your printer. Then turn on the printer and continue printing after it is idle.

Unseat And Reseat The Printhead

Sometimes you can tackle an HP OfficeJet Pro 8600 0xc19a0020 Printer Error by unseating and then reseating the printhead.

  • Open the cartridge access door from the left side of the printer.
  • Once the cartridge is idle, unplug the cords and lift the carriage latch.
  • Grasp the printhead and lift it up slightly.
  • Now gently rock the printhead and make sure it is properly seated in the carriage.

Dial Our Helpline Number for Fix HP Printer Errors by Our HP Printer Support Expert


Printers are a quite sensitive device. At times, you might encounter some complicated errors. In case, you are stuck with any such printhead related problem, get it resolved from experts. Ignoring the issue or trying random hacks can result in some severe damage. Give us a call on our HP Printer Technical Support Phone Number 1-800-597-1052 for instant solutions in your budget. Our engineers work 24*7 for your convenience. So, avail our services without a second thought. You can also use our live chat support portal to resolve your queries. Finally, you can send us an email for effective solutions.

Call our HP OfficeJet Pro Support Number professionals for any related HP printer issues. We are available 24*7 for users to assist them in resolving a wide number of complex HP issues as and when call made by them. Our solutions are exceptional and comprehensive to grab for users with the most matched answers available with us. Give us a call and we are right there to listen up to their queries anytime.

Fix Printhead Problem Of HP Officejet 6830 Printer

How to Fix HP OfficeJet 6830 Printer Printhead Problem?

This particular hp officejet pro 6830 printhead error is commonly known as 0xc19a0003 code which is termed as a common fault while working with the HP OfficeJet printer. The problem seems to shoot due to excessive ink leakage faced in the HP printer. In such cases, it is found that the absolute bottom of your printer just under where the print head is actually located is often seems to have fully drenched out with ink and of-course it will result in a dripping state. Here, we will introduce you with top ways to Fix Printhead Problem Of HP OfficeJet 6830 Printer.

Fix Printhead Problem

Steps to Fix Printhead Problem of HP OfficeJet 6830 Printer

Step 1: Handling of the Cover First

• Open up the cover if you want to change ink cartridges.
• Disconnect the power button next and remove all screws which can be seen at the inner top cover section of the device. For this, users will either need an appropriate size of the screw driver. One can even take help of a flathead screwdriver to perform the process accurately.
• Next, carefully lift off the inner top cover of the printer device by putting it in a right way. For this you do not have to disconnect all the cables.
• Place them on the side to easily get access of all printer’s internals equipment.

Step 2: Managing the location tape next

• Make a proper note of the location tape’s orientation to effectively put this back into an appropriate state in exactly the way it came to you first.
• Then, it is advised for users to gently remove the location tape to follow further process of dealing with HP OfficeJet 6830 printer print-head error.
• Next, carefully move all screws from the print head’s base

Step 3: Lifting up the Assembly Base Accurately

• In this step, users need to lift up the whole assembly including the printhead as well as its bar towards the upper direction and then tilt it upside down.
• Clean up the bottom section of the HP OfficeJet printhead by applying a lint-free cloth to remove its excessive ink.
• Now, reverse all the above instructions carefully.
• Plug in the power
• Turn it on now.

Step 4: Go to the Control Panel Now

• In the printer’s control panel area, simply swipe left and then go to “Setup / Printer Maintenance” section to select the “Clean Print-head” option.


Get in touch with our HP Printer Customer Support expert technicians to help us solve your issues provided if you have not been able to fix it up with all the above mentioned procedures. One can easily be reached out by customers 24*7 hours to fix up their related problems on prompt basis. Our support answers are chosen as the best ever solutions by thousands of users across the country. Call us at Toll-Free number +1-800-297-9982 now!