Category Archives: HP Photosmart Printer Support

Fix Pint Overrun Error in HP LaserJet Printer

How To Fix HP Printer Error Code 30?

An error which arises due to the printer has not been activated for long and this is especially if users are working with the HP Photosmart series printer. Most probably users might have not used the device for 3 months or more and now when they are making an attempt to work with it, this kind of error pops up by saying “Printer not activated error code 30”. So, follow below solutions to Fix HP Printer Error Code 30.


Solutions to Fix HP Printer Error Code 30

Solution 1: Perform This Solution to Isolate The issue by Fixing it With Appropriate Results: 

  • Disconnect the power cable carefully from the printer while the printer is kept in ON mode
  • De-attach any other attached cables to the printer.
  • Press and hold the printer’s power button gently for at-least 15 seconds.
  • Ensure that the printer is well connected to the wall outlet directly and not to a surge protector.
  • Reconnecting the power cable to easily print the document is necessary. Further, it is to be noted that the printer should power ON by itself. If it does not then, do it manually power.

HP Photosmart Printer Support technical team has suggested another solution if the above one does not seems to be working out

Related Blog: How to Fix HP Printer Error Code 49.4c02 ?

Solution 2: This Solution Should Applied if in Case the issue is Directly Confined to Specific Browsers.

  • Press the “Windows key” + “R” button to get access to the “Run” window.
  • Type the “inetcpl.cpl” icon and then, press “OK” icon to get access to the internet explorer properties.
  • Go to the “Advanced” menu to select the “Reset” option for resetting the internet explorer.
  • Now, work with the internet explorer and try to browse

Guidelines Involved for Chrome Browser:

  1. If you are a Chrome user then, at the extreme top right, click “More” icon (and then tap the “Settings” icon.
  2. At the bottom section, click to choose the “Show advanced settings” icon.
  3. Under this section, simply tap the “Reset settings,” and click on it
  4. You will see a box appearing on the screen, click to reset mode.



Connect to Technicians at HP Photosmart Printer Customer Care Number for Prompt Replies!

Get in touch with us at HP Photosmart Printer Customer Service Number for experiencing immediate replies to all your issues. Call our 24*7 hours support service team where users are guided with the most right choice of answer in just one call while ensuring that issues are solved immediately.

Troubleshoot Server Connection Error 403

How to Fix HP Photosmart 6520 Server Connection Error 403?

The chances of receiving Server Connection Error 403 in HP Photosmart 6520, when you are trying to scan to email, are due to problem Server communication error. Then don’t worry about it. In this blog, we will discuss you about scan to email server connection error 403, how to connect to hp photosmart 6520 what causes it, and provides some methods on trying to fix it.

Server Connection Error 403 in HP Photosmart 6520 is generally coming, due to computer crash, run slowly, software not be opened, Printer shocking, No printing signal, a Dot matrix printer facility not recognized, Printer not printing, Printer was broken, PC collision, Operating system computer power off, Dot matrix printer loss, etc.

Fix Server Connection Error 403

Causes of HP printer Error 403

  • Corrupt or damaged system files
  • Incomplete installation process of the Windows operating system
  • Incorrect registry entry
  • Might be your PC has come under a malware or virus attack
  • Might be miscommunication between the PC and the Windows Automatic Update service

Methods to Fix HP Photosmart 6520 Communication Error 403

Method 1:  Enable Auto Update

You should use the ePrint feature of your printer. Please follow these steps.

  • First, tap on the ePrint button that is located at the top left corner of the screen.
  • Then you require going to “Settings” option, and then you see for “Remove Web Services” option.
  • Tap “Yes”, which should go back to the Home Screen.
  • Next, hit the “ePrint” button again and then “Accept the Terms”.
  • Then press “Yes” if you prompted to enable “Auto Update” option.
  • After complete the process, you should try scanning again.

Method 2: – Reset the Printer

  • Hard reset the HP printer.
  • Until the printer is turned on, you have required unplugging the power cord.
  • Then you should wait at least 28-30 seconds.
  • Next, plug the power back into the HP printer.
  • Now again test the scan to email.

Method 3: – Setting the Services

If the above process, doesn’t work, then try these steps, but before, ensure that the printer is plugged directly into a wall outlet and not a surge protector.

  • On your printer hit on the “Web Services” icon, this appears like a tablet with a phone beside it.
  • Then tap on “Settings”.
  • Click on “Remove Web Services” option.
  • Next, tap on the ‘Web Services” icon again.
  • Tap on “Setup” button and then “Yes”.

Method 4: – Setting Manual DNS Addresses

You should try to set manual DNS addresses, which will definitely help to solve the problem

  • First, you have to open the HP Photosmart 6520 icon and then hit on “Printer Home Page (EWS)”, which will show EWS.
  • Hit on “Network” tab, and then click on “Networking”
  • Tap on ‘Network Address (IP)” and then you have to need to set the “DNS Address Configuration” as Manual.
  • Then set the preferred address as
  • Set the Alternate address as and confirm the changes.
  • Then hit on “Settings” tab.
  • Next, you have to choose the correct “Country/Region”.

In this way, you can easily fix this HP Photosmart 6520 Server Connection Error 403.

For further queries associated HP Printer issues, get in touch at our HP Customer Support team to receive the best possible solutions & support.  Our technical support experts are available at +1-800-297-9982 (toll-free) number, 24×7 for your help.

Reset an HP Photosmart Printer

Steps to Reset an HP Photosmart Printer

Resetting the Hewlett-Packard (HP) Photosmart printer can easily resolve all types of software problems and other error messages related to ink cartridges as well as printing issues. A user can easily reset an HP Photosmart Printer either via disconnecting it completely from the power source, or via restoring method of the printer to its original factory settings.

Reset an HP Photosmart Printer

Expert Guidance to Reset an HP Photosmart Printer by HP Printer Tech Support:

Disconnecting Completely from Power Source:

  • Verify that the Photosmart printer is powered on, and then disconnect the USB cable from the back of the printer.
  • Open the printer cover and then carefully remove the ink cartridges.
  • Close the printer cover, and then wait for a message to display on the screen which is readable as “Insert Ink Cartridges.”
  • Disconnect the power cord right from the back of the printer.
  • Wait for a minute to pass, and then reconnect the power cord to the printer carefully.
  • Wait for the printer to automatically restart.
  • Open the printer cover, and re-insert the ink cartridges.
  • Close the cover, and then reconnect the USB cable to the back of the printer

See Slides about HP Newly Launched App: How to Download & Use “HP All in One Printer Remote App”?

Restore the Factory Settings:

  • Press the “Menu” option which is located in the front console of the HP Photosmart printer.
  • Press the Up and Down arrows which are located in the console to help find and select “Preferences ” according to users’ choice
  • Highlight the “Restore Defaults,” and then select “OK.”


If you still unable to use your HP Photosmart printer, reach out at our HP printer technical support services, available for different group of customers using various HP related issues worldwide. We work 24 hours a day to meet their daily demands for various workings issues faced by them. We believe in customer satisfaction and have the best track record of the highest success rate to identify customer’s problem and solve them instantly with successful results. If you are looking to contact HP printer customer support and searching for online assistance to resolve your problems, you can call us on our toll-free number +1-800-297-9982 and we will get back to you via online tech support service with the best customer care support solution at very reasonable charges.